Optical Out - Sony DTC-670 Operating Instructions Manual
Digital audio tape deck
Hide thumbs
Also See for DTC-670:
- Operating instructions manual (42 pages) ,
- Service manual (79 pages)
Advertisement
Connections
This section describes about the connecting cords and the
analog and digital connections.
Select the connection
depending on your equipment connected with this unit.
Rear Panel Jacks
LINE IN (line input) jacks (phono jack)
Connect to the recording outputs of an amplifier. Signals
supplied by the amplifier can be recorded using the
sampling frequency of 48 kHz in the standard play mode
or 32 kHz in the long play mode.
LINE OUT (line output) jacks (phono jack)
Connect to the DAT or tape inputs of an amplifier. The
piayback signal of this deck will be output.
COAXIAL/OPTICAL DIGITAL IN (digital input) jacks
(coaxial phono jack/optical jack)
Connectto the digital outputs of an amplifier
having a built-
in D/A converter or other digital source, such as a CD
player for digital-to-digital recording.
OPTICAL DIGITAL OUT (digital output) jack
(optical jack)
Connect to the digital inputs of an amplifier having a built-
in D/A converter or another DAT deck, for playback of a
DAT cassette or digital-to-digital recording.
Notes on connection
e
Use the connecting cords specified in the illustrations.
e@
Turn off the power for all equipments before making
connections.
e
Be sure to insert the plugs firmly into the jacks. Loose
connections may cause hum and noise. When
unplugging, grasp the plug and not the cord.
Notes on the optical cable
@
Donot bend the cord. When the cord is not used, curl it
with a diameter of more than 15 cm (5 7/g inches).
e@
Do not use it under high temperatures.
@
When the optical cable is not connected, cover the
OPTICAL IN/OUT jacks with the supplied caps.
Note on sound signals
When connecting an optical cable to the DIGITAL IN/
DIGITAL OUT jacks, sound signals (L/R) are transmitted
together through the cable.
Connecting Cords
There are following three types of connecting jacks at the
rear of the deck. Each type of jack requires a different type
of connecting cord.
Audio signal connecting cord
(supplied, or optional RK-C77 etc.)
Red
White
af;
See
oar e:
Oe
=e-+@
LINE OUT
White
Red
= LINE IN
Coaxial digital connecting cord
ional VMC-1ES,
e t c .
coaxiaL — (Ptona
Sete)
COAXIAL
our'
IN
* This unit is not equipped with the COAXIAL OUT jack.
Optical cable
(optional POC-15, etc.)
OPTICAL OUT
OPTICAL IN
How to connect the optical cable
Remove the cap.
Advertisement
