Table of Contents
Advertisement
If the ink ribbon should tear
Repair the ribbon with transparent tape. There should be
no problem with using the remaining portion of the
ribbon.
Repair the ribbon
with transparent
tape.
Notes on storing the print cartridge
* Avoid placing the cartridge in a location subject to:
- high temperatures
— high humidity
— excessive dust
— direct sunlight
¢ When you are going to store a partially-used cartridge
for an extended period of time, store it in its original
bag.
On the print paper
Notes on storing the print paper
¢ Avoid placing the print paper in a location subject to:
— high temperatures
— high humidity
— excessive dust
~ direct sunlight
¢ When you are going to store a partially-used print
paper for an extended period of time, store it in its
original bag.
Before printing
Do not write or print patterns and characters on the print
paper before printing.
Troubleshooting
If you run into any problem using the printer, use the
following check list.
Should any problem persist after you have made the
checks below, consult your nearest Sony dealer or Sony
service facility.
If the error message ar pears on the TV screen, see "If
these error messages appear" on the next page.
The power is not on.
* Coane: the AC power cord to a AC outlet securely.
There is no picture on the TV screen.
* Set the TV's input selector to video input.
* Turn on the power of the TV, camcorder and printer.
The camcorder's power may be turned off if the
camcorder stands by for recording for about five
minutes. Turn the power on again in this case.
* Connect the printer to the camcorder and TV correctly.
* Start playback on the camcorder (or VCR).
Cannot print.
* Insert the print paper into the paper tray.
» Press MEMORY RECALL and then press PRINT.
* Designate the picture by pressing STANDARD (or,
UPPER or LOWER).
» Remove the jammed paper.
See "If the print paper jams" on the next page.
The color of the print is too light, or too dark.
"wou
wow
» Set BRIGHT on the upper panel to "+" or
The outline of the print is too dull, or too sharp.
wow
» Set SHARP on the upper panel to "+" or
" — " .
The beeps sound.
» An unvailable button has been pressed during
operation.
Cannot remove the print cartridge.
* Turn the power off. Remove the print cartridge when
the rotation sound of the printer stops.
(continued)
For Your Information
2 1
Advertisement
Table of Contents
