Table of Contents
Advertisement
Printing 1/4- or 1/16-size pictures
SPLITMODE
STANDARD
POSITION
SOURCE
PRINT
To return to normal print mode
Press SPLIT MODE until "SPLIT 4"
and "SPLIT 16" disappear.
You can designate the position for
the pictures
Press POSITION repeatedly until the
frame you want to designate flashes.
To re-designate printing pictures
Press SOURCE, and press POSITION
repeatedly until the frame you want
to designate flashes. Then store the
picture again.
1 2
Printing
You can make prints divided into 1/4- or 1/16-size pictures. Each print has 4
(when 1/4-size) or 16 (when 1/16-size) pictures.
The pictures are designated from the upper left to the lower right. You can
also directly designate where to put each picture.
1
Press SPLIT MODE until
"SPLIT 4" or "SPLIT 16"
apnearse on the TV screen.
The flashing frame on the TV screen
\ | /
shows that the picture is to be
=
i
a) a
printed on the corresponding
'an
position of the print.
2
Start playing back the camcorder.
3
When the playback
picture you want to print
appears on the TV screen,
press STANDARD.
Aas
Press SOURCE.
The playback picture appears on the TV screen again. The frame
where you've stored the picture changes to a painted square. The
frame where you'll store the next picture starts flashing.
5
Repeat steps 3 and 4 until you have designated 4
(or 16) pictures.
The designated pictures appear on the TV screen in 1/4- or 1/16-
size.
When the playback picture is displayed on the TV screen, you can
check the pictures by pressing MEMORY RECALL.
6
Press PRINT.
Advertisement
Table of Contents
