Advertisement
| Meyer: bilo) am-tave mal laveitlelame)mOrelaline) [>
Front Panel Remote Commander
(24)
Fae RN
Ee OEE oe
ERT
eT
Tape operating buttons
@ (stop): Press to stop recording or playback
& (play): Press to play back the tape.
§l PAUSE (pause): Press to stop for a moment during
recording or playback. To restart recording or
playback, press this button again or press the B>
button
If the unit is left in the pause mode for about 10
minutes, it will automatically be released and the
deck will enter the stop mode. To restart recording
or playback from the stop mode, press the @ REC or
B® button respectively.
O REC MUTE (record muting): Inserts a sound-
muted portion (space).
@ REC (recording): Press to enter the record-pause
mode. After pressing this button, press the #1 PAUSE
or B
button.
Ix / D1 (AMS): Press to locate the beginning of the
selection during the playback.
44 / >> (rewind/review, fast-forward/cue): In the
stop mode, press to rewind/fast-forward the tape
During playback, press to rewind or fast-forward the
tape while listening to the sound.
& OPEN/CLOSE button
Press to open or close the cassette compartment.
DISPLAY MODE
button
Changes the display mode.
(Refer to page 10.)
RESET
Resets the linear counter to "Om 00s".
31
RMS play buttons
ENTER: To program the selections in a desired order,
press this button after pressing the numeric
buttons.
CHECK: Press to check the programmed contents.
REPEAT 1/ALL button
Press to play a desired portion repeatedly. Each time
you press the button, the indicatior changes as follows
REPEAT 1 ~» REPEAT ALL ~+ off
SKIP PLAY button
Press to activate the skip ID code function. The portion
of the tape previously marked will be skipped
CD operation buttons
Operative only for the Sony CD player equipped with a
Remote Commander.
11 (pause): Press this button twice to start playback
Press this button once in the playback mode, the
deck enters the pause mode
Kd / BI (AMS): Press to locate the desired
selection on the Compact Disc during playback or in
the stop mode.
CD SYNCHRO (CD synchronized recording)
buttons
(The playback of the Sony CD player equipped with a
Remote Commander and the recording of the DAT
deck can be performed simultaneously.)
STANDBY: Press to set the unit in the record-standby
mode.
START: Press to start recording of the DAT deck and
then playback of the CD player.
STOP: Press to stop the DAT deck recording and the
CD piayer playback.
mote Commander
Operatio
Each button on the remote commander functions in the
same way as those having the same name on the front
panel
However, the following operations cannot be performed
using the remote commander.
Use the front panel controls
instead.
* Turning the power on and off
* Selecting digitai(optical/coaxial)/analog input source
* Setting the clock
* Adjusting the recording level and balance
¢ Adjusting the headphones level
* Setting the timer recording/playback
* Selecting the record mode (standard or long)
¢ Turning the SBM function on and off
The following operations can be performed only with the
remote commander
* Activating CD synchronized recording using a Sony CD
player and controlling the CD player
* Locating a selection on the Compact Disc or changing
the CD player to pause mode (possible only when a Sony
CD player is used)
* Repeat play
* Skip play
* RMS* play
* RMS: Random Music Sensor
* Resetting the linear counter to "Om 00s"
Insert two size AA (R6) batteries with correct polarity,
and close the lid
Notes on remote control
* Do not expose the remote sensor on the deck to strong
light such as direct sunlight, lighting apparatus, etc.
¢ Do not place any obstructions between the Remote
Commander and the remote sensor, or else operations
will not be performed correctly.
* The controllable range is limited. Point the Remote
Commander directly at the remote sensor on the deck.
¢ When remote control operation distance becomes
shorter, the batteries are weak.
Replace both batteries
with new ones
To avoid battery leakage
When the commander will not be used for a long period of
time, remove the batteries to avoid damage caused by
battery leakage and corrosion
Battery life
About half a year of normal operation can be expected
when using the Sony SUM-3 (NS) batteries
Advertisement
