Temperature Requirements - HP 8082A Operating And Service Manual
Hide thumbs
Also See for 8082A:
- Operating and service manual (113 pages) ,
- Operating and service manual (111 pages) ,
- Operating and service manual (17 pages)
Table of Contents
Advertisement
WARNING
To avoid the possibility of injury or death, the foliowing
precautions must be
a if this instrument is to be energized via an
for voltage reduction, make sure that the
ground connection is not interrupted.
b. The power cable plug shaff only be inserted into a
socket outlet provided with a protective earth contact
The protective action must not be negated by the use
of an extension cord without a protective conductor
before connecting the instrument to the supply.
2 - 1 3
The instrument will operate from nominaf
Figure Z-4.
Switch Settings for the various
Before applying power to the instrument,
check on the rear panel that the switch is
tions
before the instrument is
To check the power requirements proceed as
follows:
a Remove tk fuse and check its value:
for 22OV/24OV operation 1 A
for lOOV/l2OV option 2P
positions corresponds to the local
screwdriver to change the switch positions.
d. Connect the power r&e to the rear con-
nector.
2-15
Temperature Requirements
The instrument operates within specifi-
cations when the ambient temperature is between
stored between -4O'C (-40°F) and 75' (167OF).
2 - 1 8
Figure 2-2 shows the possible
mounting configurations. If handles are fitted and
need to be removed, the plastic trim
be taken off as shown in Figure 2-5.
corner
Lift
a
fuse into tha fus&@&r.
The word generator may be
must first
of the pla5tk trim with a screw-
Advertisement
Table of Contents
