Download Print this page

Bosch GDE18V-12 Operating/Safety Instructions Manual page 7

Hide thumbs Also See for GDE18V-12:

Advertisement

Available languages

Available languages

Changing the Dust Cap
(Fig. 7)
You may need to change the dust cap if the
wall contact surface shows clear signs of wear
which is causing dust to escape through the
extraction brush during extraction.
Removing old dust cap 7:
— Press (A) the locking button 11 and pull (B)
the dust cap 7 upwards out of the holder.
Mounting new dust cap 7a:
— Insert (C) the new dust cap 7 into the holder
until the locking button 11 clicks in place.
Emptying the Dust Box
Wear respiratory protec-
tion, protective eyewear,
gloves and dust protective clothing. Dust box
may contain crystalline silica dust.
(Fig. 8, 9, 10)
Please inspect the filter 13 regularly for dam-
age and/or excessive dust accumulation.
Empty the dust box 12 after completing your
work or as needed. The viewing windows 6 on
both sides of the dust extraction attachment
enable you to check how full the dust box is
(Fig. 1). Empty the dust box when the window
level is no more than half covered. If the dust
box is filled beyond this point, the HEPA filter
system will not be working properly during use.
REMOVING the dust box from the dust ex-
traction attachment:
1. Hold the power tool with the dust ex-
traction attachment horizontal and switch
on the power tool for a few seconds. This
will cause residual dust to be cleared out of
the extraction channel into the dust box 12.
Use caution removing dust
box from the attachment
to avoid release of crystalline silica dust.
2. Simultaneously press the tabs 4, located on
both sides of the dust box 12, to unlock the
dust box from the dust extraction attach-
ment (Fig. 8).
160992A7EN GDE18V-12 20230323.Indd 7
Operating instructions
Fig. 7
Fig. 8
3. With the dust box 12 unlocked, slowly pull
-7-
(7)
B
C
(12)
the dust box downward from the dust ex-
traction attachment (Fig. 8). NOTE: Keep
the tool in a horizontal drilling position to
avoid spilling any of the contents while pull-
ing the dust box out of the dust extraction
attachment.
A
Click
(11)
(13)
(4)
3/23/23 1:50PM

Advertisement

loading