Table of Contents
Advertisement
6.
Move the slide latches to the open position and insert
your connectors in the mating sockets on the front of
your instrument (see Figure 4-1).
7.
Push the latches on each side of the connector to the
locking position to securely fasten the connectors to
the front of the instrument.
FEMALE CONNECTOR
(CONNECTS TO INPUT)
MALE CONNECTOR
(CONNECTS TO OUTPUT)
Figure 4-3. Digital I/O Connector Pin Assignments
(viewed from the solder pin side of the connector)
Single Stage
Figure 4-4 shows the output stage of one of the 16 output
Output Schematics
bits as well as the IDAC and ODAV control signals. With
the TTL driver enabled, the output bits and control signals
are compatible with TTL logic levels. When the TTL driver
is disabled, the output bits and control signals are
compatible with open collector logic levels. (Refer to the
specifications in Table 1-1.)
4-4
Front Panel Connections
Advertisement
Table of Contents
