Table of Contents
Advertisement
Help
DMA speed
Low - Normal
This option allows you to change the bus timing during DMA
(Direct Memory Access).
Normal specifies IBM PC AT compatible bus timing. Normal is
default.
Low expands the DMA cycle length.
Shadow option PROMs
Disabled - Enabled
Enabled means that the code of the option PROMs is copied to the
random access memory. This speeds up the program execution
considerably.
Disabled is default.
Exiting the Enhanced Menu
When you are finished with the Enhanced menu, press the Esc key
to return to the Setup menu.
Exiting the Setup Program
When you are finished with the Setup program, select the Store and
Exit option in the Setup menu and press Enter.
This stores the installation parameters in the battery -backed-up
CMOS memory in the system unit, and exits the Setup program.
If you want to exit the Setup program without storing the installation
parameters that you have entered, you can press the Esc key instead.
Note: If you change the Date or Time, the clock and calendar is
updated directly. It does not matter whether you exit the Setup
program with the Store and Exit option or by pressing the Esc key.
If you have not changed anything, the text
Exiting setup routines
is displayed on the screen after you have exited the Setup program.
Control is then passed to the Maintenance program.
4-26
Advertisement
Chapters
Table of Contents
