Table of Contents
Advertisement
FusionModule2000 Smart Modular Data Center
Maintenance Guide
Step 3 Remove the failure WiFi converter from the guide rails.
Figure 6-39 Removing the WiFi converter
Step 4 Install the reserved WiFi converter in the original position and connect the cables.
Step 5 Log in to the ECC800 WebUI, choose Monitoring > System > WiFi Converter > WiFi
Management, enable the WiFi function, and set the WiFi SSID and password according to
the customer plan.
Step 6 On the WebUI of the ECC800, choose Monitoring > System > ECC800 > Controls >
Delete device with communication failure, and click Submit.
Step 7 Log in to the ECC800 WebUI, and edit the plan view by adding new devices.
Step 8 Check that the app can be connected properly.
----End
6.4.7 Replacing a Multi-Functional Sensor
Impact on the System
The temperature, humidity, and smoke cannot be sensed.
Preparations
Procedure
Step 1 The multi-functional sensor is clamped into a base through a slot and a buckle. Hold down the
multi-functional sensor and slide it to the side to remove the sensor.
Issue 05 (2020-03-25)
Tools: ESD wrist strap, ESD gloves, Phillips screwdriver, step ladder, labels, marker
Material: multi-functional sensor
Copyright © Huawei Technologies Co., Ltd.
6 Parts Replacement
86
Advertisement
Table of Contents
