Table of Contents
Advertisement
This time
Impossible to close
Open upper housing
during cooking
Promptly start cooking
Fail to cook at the
appointed time
Fail to make appoint-
ment
Steam leakage
※
There are water drops
nearby exhaust nozzle
of steam valve
Water drops on
removable cover plate
and inner cooking pot
There are condensed
water dropped from
sealing ring and other
parts after opening
upper housing
Spilling
inside inner cooking pot
The center part is
sagging
22
Investigate the reasons
Whether the removable cover plate has been installed well? If the removable cover plate is not installed, the
upper housing cannot be closed to prevent forgetting the installation of the removable cover plate.
Whether the plug-in part under the removable cover plate is plugged in?
Whether there are foreign matters attached on opening buckle plate?
Whether the removable cover plate is blocked with foreign matters?
Please press the central part on the front side of upper housing until a sound of "clatter".
Whether there are foreign matters attached on opening buckle plate?
Cooking will promptly start for appointment within 1-2 hours.
Whether the a.m. and p.m. are confused? The clock is of 24-hour display mode.
Whether the current time is wrong?
Whether lithium batteries are run down?
be delayed for about 10 minutes.
Whether inner cooking pot is installed before presetting appointment time?
Whether the appointment is not set or the OFF/CANCEL button is not pressed?
Whether there are foreign matters attached on sealing ring, edge of inner cooking pot and outer casing cover?
Whether there are foreign matters attached on upper housing and opening buckle plate?
Whether the sealing ring is damaged and whether inner cover or inner cooking pot is deformed?
Whether the removable cover plate is installed?
Steam will be converted to water drops attached after cooling. Not failure.
To prevent rice from getting dry, there may be water drops attached to the removable cover plate and inner
cooking pot, and this is not a failure.
Sometimes, condensed water will drop on outer casing cover and other parts based on the time, room
opened or is slightly opened with hands.
condensation and there will be much condensed water attached.
Whether there are foreign matters attached on the main temperature controller and outside inner cooking pot?
Whether there is very little rice or very much water, or rice is washed inadequately?
Is the porridge cooking mode right?
Whether there are foreign matters attached on temperature sensor on the upper housing and main
temperature controller?
Whether there is dirt inside steam valve?
Whether steam valve and removable cover plate is installed well?
Whether the removable cover plate is blocked with foreign matters?
This is caused by the unique cooking method of induction heating in the inner pot, and it is not abnormal.
Please stir the rice.
Advertisement
Table of Contents
