Table of Contents
Advertisement
Available languages
Available languages
Using your appliance
3x
2x
16
BO S C H
1. Filling the water tank
This appliance has been designed to use normal tap water.
Important: Do not use additives! The addition of other
liquids, such as perfume, vinegar, starch, condensation
water from tumble dryers or air conditioning systems, or
chemicals will damage the appliance. Any damage caused
by the use of the aforementioned products will make the
guarantee void!
Open the illing lid (11).
1
2
Fill the water tank (9). Never ill beyond the level
"max" (10) for maximum illing !
Close the illing lid.
3
Reill the water tank when the indicator light (3) comes on.
Three beeps will be heard.
Important: Once reilled, press button (3).
Tip: To prolong the optimum steam function, you may mix
tap water with distilled or demineralised water 1:1. If the tap
water in your area is very hard, mix tap water with distilled
or demineralised water 1:2.
ºC
2. Heating
If your steam station is equipped with an iron lock
1
system (13*), release the iron by pressing the button.
2
Unwind the steam hose (5) and the mains cable (6).
Plug mains cable into an earthed socket.
Press the button (1) to switch the appliance on.
3
Indicator lights (1, 15) will lash indicating that the
appliance is heating up.
4
When the iron is ready to use, the indicator lights
(1, 15) will remain permanently lit. Two beeps will be
heard.
* Model dependent
Advertisement
Table of Contents
