Table of Contents
Advertisement
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [6] + [0] + [8].
The keypad will display the contrast screen.
Keypad 001 Contrast
L
Press
2. Use the [] and [] keys to adjust the bar until the
desired contrast is reached.
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Devices > Commands >
Keypad Backlight
This menu allows you to adjust the brightness of the
keypad's LCD display backlight. Each keypad can have
their display adjusted separately.
Enter programming mode (PIN + MENU) then,
1. Press [MENU] + [6] + [0] + [9].
The keypad will display the backlight screen.
Keypad 001 Backlight
L
Press
2. Use the [] and [] keys to adjust the bar until the
desired backlight is reached.
3. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Devices > Keypads & Readers >
Name
This menu allows you to program the name for each keypad
or reader connected to your system. Each name can be up
to 20 characters. You should program a name that help
to identify where the device is located in the building. eg.
Front Door Reader.
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [6] + [1] + [0].
A list of available devices will display on the keypad.
2. Use the [] and [] keys to select the device name
that you want to change, then press [OK] to select.
The keypad will display the following:
Bosch Security Systems 3/23 BLCC610U
H
OK to
SAVE
MENU 6-0-9
H
OK to
SAVE
MENU 6-1-0
Name Kp1
Keypad 1 Name
Press
3. Use the [] and [] keys to scroll the cursor left and
right across the device name text. Use the [] and
[] keys to scroll through the different characters
available. To clear all text from the cursor position
to the right, press the [OFF] key.
4. Press [OK] to save and exit, or press [MENU] to exit
without saving.
Devices > Keypads & Readers > WiFi Settings
Wi-Fi Settings
SSID Scan
SSID
Security
Password
This menu option is only available when the system detects
that a WiFi enabled keypad is installed on the system.
Wi-Fi Enabled keypads include two new symbols which
indicate the connection state between the keypad and
the customers wireless access point. A Wi-Fi symbol will
be displayed on the keypad display after the system has
logged onto your local Wi-Fi network.
Wi-Fi Signal Indicators
A brief description of the options available are listed below.
For more information refer to the Wi-Fi Enabled Keypad IRG.
SSID Scan
This option will request the system to create a list of all
SSID's currently in range of the Wi-Fi keypad. Use the down
arrow key to step through the available SSID's and press OK
to select the required station.
The SSID scan also displays the signal strength for
each station in dB's (Decibels). To ensure reliable Wi-Fi
performance do not attempt to connect the keypad the a
station with a signal strength lower than -65dB.
i
The lower the number the better the signal strength is.
For example -25dB is better than -55dB. If the signal
Note
strength for the required station is higher than -65dB
you should consider relocating the keypad or using a Wi-
Fi range extender.
SSID
This option allows the installer or master user to manually
enter the required SSID. This typically will need to be dont
Solution 6000
User Guide
OK to SAVE
MENU 6-1-9
35
Advertisement
Table of Contents
