Table of Contents
Advertisement
control panel can then take the appropriate action.
This feature requires an optional voice module to be fitted
to the system by your installer. Additional programming
information is included with the voice module.
Comms > Commands >
Register Customer
Reserved for future use
Comms > Telephone Numbers >
Destination 1
The installer may have configured your system to report
alarm messages using one of the self monitoring formats
such as SMS, Domestic or Voice reporting. When one of
these formats has been configured the system will send
alarm reports to a phone number or numbers belonging to
you and or other family members.
Depending on the selected format the system is capable
of reporting alarm messages to 5 different numbers on
destination 1 and an additional 5 numbers on destination
2 if required. Each number can be up to 32 digit long.
When SMS format is selected the system will send alarm
reports to all numbers programmed in the destination.
SMS CALL-ALERT
i
SMS Call Alert requires an optional 2G GSM Module
CM743B or 3G GSM Module CM744B to be fitted.
Note
When entering the mobile telephone number you wish to
send the SMS report to you can append *00* to the number
which tells the system to call the mobile number first then
send the SMS report. This is especially useful at night when
a simple SMS message may not be satisfactory to get your
attention but a phone call to your mobile will. With many
smart phones your able to tailor the ring depending on
the caller and you could use an appropriate alarm sound
to indicate your alarm system is trying to contact you. We
refer to this feature as a ping to the number and it can be
selected for one or all the mobile numbers in the list as well
as being able to select the number of seconds (1-99) that
the phone will ring for.
Examples:
Phone 1:
0408249351 (this will only send SMS to this number)
Phone 2:
0412400922* (this will call the number first for 20 seconds
then send the SMS)
Phone 3:
0408249351*35* (This will call the number first for 35
Bosch Security Systems 3/23 BLCC610U
seconds then send the SMS).
When voice reporting is selected the user who answers the
call can choose whether the message is also sent to other
numbers in the destination 1 list or not.
When reporting in domestic format, the call must be
acknowledged by the user who answers the incoming call.
If the user fails to acknowledge the call, the system will call
MENU 5-0-8
the next number in the list until the maximum number of
call attempts are reached.
To acknowledge the call, the user needs to press the [#] key
on their telephone.
MENU 5-1-1
Enter programming mode (PIN + MENU) then,
1. Enter [MENU] + [5] + [1] + [1].
If the control panel is not programmed to report
using one of the self monitoring formats, the
keypad will display the following:
If the control panel has been configured to report
via a self monitoring format, the keypad will display
information for telephone number 1.
2. Use the [] and [] keys to select the phone number
to add or change, then press [OK] to select.
The keypad will display the following:
3. Use the [] and [] keys to scroll the cursor left and
right across the phone number. Use the [] and []
keys to change the individual digit in the number or
press the [OFF] key to clear the whole number and
then enter the new number using the 0-9 keys.
4. Press [OK] to save and exit, or press [MENU] to
cancel.
Comms > Telephone Numbers >
Destination 2
This menu allows up to 5 phone numbers to be
programmed when one of the self monitoring formats
Solution 6000
Reporting format does
not allow user changes.
Contact installer for
further information
Phone 1= 0453287306
Phone 2=
Phone 3=
Press
OK or MENU
Destination 1 Phone 1
0453287306_
Press
0-9 OK to SAVE
User Guide
MENU 5-1-2
31
Advertisement
Table of Contents
