Unload All Tools - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Several magazines
If you have set up several magazines, then the "...relocate from magazine... location... to..."
window appears after pressing the "Relocate" softkey.
Select the desired magazine and location, and confirm your selection with "OK" to load the
tool.
8.8.3
Unload all tools
You have the option of unloading all tools from the magazine list. A single request
successively unloads the tools from the list.
Requirement
The following requirements must be satisfied so that the "Unload all" softkey is displayed and
available:
● Magazine management is set up
● There is no tool in the buffer / in the spindle
Procedure
Multiple load points
For a magazine, if more than one loading point was set-up, using the "Select loading point"
softkey, you have the option of opening a window in which you can assign a loading point to
a magazine.
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1.
The magazine list is opened.
2.
Press the "Unload all" softkey.
A prompt is displayed as to whether you really want to unload all tools.
3.
Press the "OK" softkey to continue with the unloading of the tools.
The tools are unloaded from the magazine in ascending magazine
location number order.
4.
Press the "Cancel" softkey if you wish to cancel the unloading operation.
Tool management
8.8 Magazine
213
Advertisement
Table of Contents
