Creating A Program Block - Siemens SINUMERIK 840D sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
4.10.5
Creating a program block
In order to structure programs in order to achieve a higher degree of transparency, you have
the option of combining several G-code blocks to form program blocks.
You then have the option of opening and closing these blocks depending on your
requirement.
Settings for a program block
Display
Text
Spindle
Addit. run-in code
Automat. Retraction
Procedure
Universal
Operating Manual, 03/2013, 6FC5398-6AP40-3BA1
Meaning
Block designation
S1
•
S2
•
Spindle assignment. Defines at which spindle a program block is to be
executed.
•
Yes
For the case that the block is not executed, as the specified spindle should
not be processed, then it is possible to temporarily activate a so-called
"Addit. run-in code".
•
No
Yes
•
Block start and block end are moved to the tool change point, i.e. the tool
is brought into a safe range.
No
•
1.
Select the "Program Manager" operating area.
2.
Select the storage location and create a program or open a program.
The program editor is opened.
3.
Select the required program blocks that you wish to combine to form a
block.
4.
Press the "Build group" softkey.
The "Build group" window is opened.
Machining the workpiece
4.10 Editing a program
119
Advertisement
Table of Contents
