Set Monitoring Options - Bosch Integrus Installation And Operation Manual
Language distribution system
Hide thumbs
Also See for Integrus:
- Operation manual (94 pages) ,
- User manual (72 pages) ,
- Installation and operating manual (60 pages)
Table of Contents
Advertisement
Integrus
Menu Item
1 Fault Status
When the system detects a failure for the first time, a flashing fault message pops-up on any
menu screen:
Push the menu button to remove the fault message from the screen and to go back to the
menu screen that was visible before the fault message popped-up. The flashing message will
also disappear when the fault has been resolved.
9.1.4
Set monitoring options
The Monitoring sub-menu (2) is used to set which signal is sent to the monitoring headphone
output. It can be one of the inputs, one of the channels or no signal. When the sensitivity of
one of the inputs is being changed in the Setup menu (4J, 4K or 4L), or when assigning inputs
to channels (menu 4D, Per Channel), the monitoring output automatically switches
temporarily to that source, even when the option 'None' has been chosen. When the
headphone output is disabled (see section 7.2.12 ), the output level can not be changed and
the level indicator is not visible.
Menu Item Option
2A Source/
Volume
Bosch Security Systems B.V.
Value (read only)
Fault:
- No Faults
- Radiator Fault
- No Radiators
- No Network
- Network Error
Value 1
Source:
- In. nn
Input nr:
00 ... 31
- Ch. nn
Channel nr:
00 ...31
- Aux.L
Installation and Operation manual
Description
The connected radiators function without
problems.
One of the connected radiators is not
functioning properly.
No radiators are connected to the transmitter
When the Network Mode (see section 7.2.3 )
is Enabled, this fault is shown when there is a
fault in the optical network.
When the Network Mode (see section 7.2.3 )
is Disabled, this fault is shown when there is a
fault in the optical network. This message
usually occurs when the Network Mode (see
section 7.2.3 ) is disabled, and a DCN Next
Generation CCU is connected to the
transmitter.
Value 2
Description
Volume:
The signal from audio input nn is
-31 ... 0 dB
available on the monitoring headphone
output.
Volume:
The signal on channel nn is available on
-31 ... 0 dB
the monitoring headphone output.
Volume:
The signal on the Aux. Left input is
-31 ... 0 dB
available on the monitoring headphone
output.
Operation | en
69
IOM-INT | V1.1 | 2010.12
Advertisement
Table of Contents
