Operation; Integrus Transmitter; Start-Up; View Transmitter Status - Bosch Integrus Installation And Operation Manual
Language distribution system
Hide thumbs
Also See for Integrus:
- Operation manual (94 pages) ,
- User manual (72 pages) ,
- Installation and operating manual (60 pages)
Table of Contents
Advertisement
68
en | Operation
9
Operation
9.1
Integrus transmitter
9.1.1
Start-up
When the transmitter is switched on, the display shows the Transmitter Status screen, which
is the first item of the Main menu (see section 7.2.1 ). The display also goes to this screen
after 3 minutes of inactivity. In case the system detects a fault, the display shows a flashing
fault message (see section 9.1.3 ).
9.1.2
View transmitter status
The first screen of the Main menu gives information about the present status of the
transmitter. The screens shows the name of the transmitter (1st line) and the present
transmission mode (2nd line). See examples below. See section 7.2.2 to change the
transmission mode.
Transmitter is transmitting 10
channels from DCN.
Menu Item
Transmitter Status
9.1.3
View fault status
The fault status of the radiators can be seen in the second screen of the Main menu:
IOM-INT | V1.1 | 2010.12
Transmitter is transmitting the
Aux inputs on all channels.
Option (read only)
Name
Mode:
- nn Channels
- Aux to All
- nn Ch. Test
- Slave
- Standby
- Emergency Call
DCN
Installation and Operation manual
Transmitter is in Standby
mode (not transmitting).
Description
The first line shows the user defined name of
the transmitter (see section 7.2.13 ).
The second line shows the actual transmission
mode:
Audio signals are distributed on nn channels.
The signal on the Aux. inputs is distributed on
all channels.
The test signals are distributed on nn
channels.
The transmitter operates in slave-mode: the
radiator signal on the slave input is looped-
through to all radiator outputs.
The transmitter is in stand by mode.
An emergency signal from the Aux. inputs is
distributed to all channels.
The text 'DCN' is shown at the right side of
the second line when a DCN or a DCN Next
Generation system is connected to the
transmitter.
Bosch Security Systems B.V.
Integrus
Advertisement
Table of Contents
