Table of Contents
Advertisement
・ Percent display
- 1 2 5 . 0
・ Flow rate (When custom unit is selected)
- 1 0 . 0 0
* X X X / Y Y Y
・ Range display
1 0 . 0 0 0
R 1
m / s
In the range display, the range currently used is displayed (any one of the ranges 1 to 4). The screen
example above shows that Range 1 is currently used.
When multi-range is selected, the displayed range changes automatically as the range used is changed.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Numeric value･･･Within the range of +125.0% to −125%,
%
Unit･･･
* If the value goes out of the display range, an error message appears.
Numeric value･･･
Unit･･･
Flow direction･･･
Identification charanter･･･ "*" is character to show the custom unit.
Numeric value･･･ The span of the range being used
Unit･･･
Range･･･
－ 40 －
6 F 8 A 0 9 2 8
displayed to the decimal place of 0.1%.
"%" fixed.
7 digits maximum including a decimal point
are displayed. (Up to 9999999)
4 significant digits: The value is obtained by
3
multiplying m
/min by the set coefficient
7 digits maximum are displayed.
(The character string that was set for the
custom unit.)
In the case the flow is in reverse direction ,
"－" is displayed.
In the case the flow is in forward direction,
not displayed.
7 digits maximum are displayed.
When custom unit is selected, identification
character "*" is displayed.
The range being used is displayed as follows:
R1: Range 1
R2: Range 2
R3: Range 3
R4: Range 4
Advertisement
Table of Contents
Troubleshooting
