Troubleshooting - KitchenAid ARTISAN 5KFPM770 Operating Instructions And Recipes

Hide thumbs Also See for ARTISAN 5KFPM770:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 31
• If your Food Processor should
fail to operate, check the
following:
– Make sure the work bowl and
work bowl cover are properly
locked on the base, and the food
pusher is inserted to the maximum
fill line on the feed tube.
– See if the power cord is plugged
into a proper electrical outlet
(see "Electrical Requirements" on
page 3). If it is, unplug the Food
Processor, then plug it into the
same outlet again. If the Food
Processor still does not work,
check the fuse or circuit breaker
on the electrical circuit the Food
Processor is connected to and
make sure the circuit is closed.
• If your Food Processor should
fail to slice or shred when
using the disc:
– Make sure the raised-blade side
of the disc is positioned face up
on the disc stem. The disc has
a raised nub on the top and
grooves underneath to help align
it properly.
• If your Food Processor lid
won't close when using the
disc:
– Make sure the disc is installed
correctly with the raised nub on
top, and is positioned properly on
the disc stem.

Troubleshooting

• If the Food Processor shuts off
– The Food Processor may be
• If you have difficulty removing
– Food particles are probably lodged
If the problem cannot be corrected
with the steps in this section, see the
KitchenAid warranty and after sales
service section on pages 27-28. Do
not return the Food Processor to the
retailer – they do not provide service.
16
while it is running:
overheated. If the motor exceeds
a certain temperature, it will
automatically shut off to prevent
damage. This should be an
extremely rare occurrence. If it
happens, press the "O" Button
and wait 15 minutes for the Food
Processor to cool before resuming.
If the Food Processor still refuses to
run, wait an additional 15 minutes
for the Food Processor to cool.
the food pusher from the
feed tube:
in the interlock system. To free the
pusher, soak the work bowl cover
in warm water or wash it in a
dishwasher.

Advertisement

Table of Contents
loading

Table of Contents