Table of Contents
Advertisement
FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
●
●
●
●
●
4.5.2 Connecting Power Cables
Procedure
Step 1 Route power cables through the external cable holes.
Step 2 Open the electric control box outside the device.
Step 3 Connect one end of the active and standby power cables to the active/standby
power supply terminals/PE terminal through the cable holes in the electric control
box of the unit, and connect the other end to the power supply.
Figure 4-19 Connecting power cables (side cabling)
(1) Baffle plate 1
Issue 04 (2022-06-30)
Only trained and qualified personnel are allowed to connect cables.
Before connecting cables, use a multimeter to measure the input voltage and
ensure that the power supply is off.
Ensure that all smart cooling products are safely grounded before powering
them on.
Keep cables away from the fan or other components (if unavoidable, take
protective measures), and ensure that cables are securely connected.
When laying out cables, ensure that the power cables and signal cables are
reliably separated and that electric and extra low voltage (ELV) cables are
bound separately.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
(2) Baffle plate 2
52
Advertisement
Table of Contents
