Yamaha YAS-207 Service Manual page 18

Front surround system
Hide thumbs Also See for YAS-207:
Table of Contents

Advertisement

YAS-CU207/ATS-CU2070/NS-WSW42
2.
How to Remove Parts Installed
to the Bottom Cabinet Assembly
2-1.
Removal of Driver Full-Range (Fig. 2)
*
The driver removal procedure is the same for
both right and left.
a.
Remove 4 screws ( ② ).
b.
Remove the solder of the connector and disconnect
the cable.
c.
Remove the driver full-range.
2-2.
Removal of Driver Tweeter (Fig. 2)
*
The driver removal procedure is the same for
both right and left.
a.
Remove 2 screws ( ③ ).
b.
Remove the solder of the connector and disconnect
the cable.
c.
Remove the solder of the connector and remove
the capacitor.
d.
Remove the driver tweeter.
Rubber sheet and the cloth
ゴムシー トと布
Driver full-range
スピーカーユニッ ト(フルレンジ)
スピーカーユニッ ト (ツィ ーター)
18
Driver tweeter
Capacitor
コンデンサー
2. 
ボトムキャビネット Ass'y に
2-1.  スピーカーユニット(フルレンジ)の外し方
※  スピーカーユニットの外し方は左右同じです。
a. 
② のネジ 4 本を外します。
b. 
コネクターの半田を取り除きケーブルを外します。
c. 
スピーカーユニット(フルレンジ)を外します。
2-2.  スピーカーユニット(ツィーター)の外し方
※  スピーカーユニットの外し方は左右同じです。
a. 
③ のネジ 2 本を外します。
b. 
コネクターの半田を取り除きケーブルを外します。
c. 
コネクターの半田を取り除きコンデンサを外しま
す。
d. 
スピーカーユニット(ツィーター)を外します。
Driver full-range
スピーカーユニッ ト(フルレンジ)
Fig. 2
取り付けてあるパーツの外し方
(Fig. 2)
(Fig. 2)
Bottom cabinet assembly
ボトムキャ ビネッ ト Ass'y

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ats-2070Yas-cu207Ats-cu2070Ns-wsw42

Table of Contents