Advertisement
Manual Version: 6P103-20130916
Item
CF card
Dimensions (H × W × D)
Power consumption
Weight
Hot swapping
Interfaces
Ambient temperature
Ambient relative humidity
Compatible device models
and slots
Table 2 Console port specifications
Item
Connector
Interface standard
Transmission baud rate
Transmission medium
Transmission distance
Services
Table 3 10/100/1000BASE-T copper port specifications
Item
Connector
Interface standard
Interface type
Supported cable
Transmission distance
BOM: 3123A0MN
Specification
One built-in CF card slot
Default: 256 MB
40.1 × 399.2 × 498.8 mm (1.58 × 15.72 × 19.64 in)
128 W to 168 W
4.8 kg (10.58 lb)
Supported
•
1 console port
•
2 USB ports (hardware reserved, software not supported)
•
2 combo interfaces, which can operate in 10/100/1000BASE-T copper port
mode or 1000BASE-X SFP fiber port mode at a time.
You can use the combo enable { copper | fiber } command to activate either
port. By default, the copper combo port is activated.
•
Operating: 0°C to 45°C (32°F to 1 13°F)
•
Not operating: –40°C to +70°C (–40°F to +158°F)
•
Operating: 10% to 95%, noncondensing
•
Non-operating: 5% to 95%, noncondensing
•
12504 switches (slot 2 to slot 5)
•
12508 switches (slot 2 to slot 9)
•
12518 switches (slot 2 to 19)
Specification
RJ-45
RS-232
9600 bps (default) to 115200 bps
Asynchronous serial cable
≤15 m (49.21 ft)
•
Provides connection to an ASCII terminal.
•
Provides connection to the serial port of a local or remote (through a
pair of modems) PC running terminal emulation program.
•
Supports command line interface (CLI)
Specification
RJ-45
802.3, 802.3u, and 802.3ab
MDI/MDIX autosensing
Category-5 (or above) twisted pair cable
100 m (328.08 ft)
2
Part number: 5998-3444
Advertisement
