Table of Contents
Advertisement
Quick Links
Operating instructions
Commercial dishwasher
PFD 402 / PFD 402 DOS
PFD 404 / PFD 404 DOS
PFD 405 / PFD 405 DOS
PFD 407 / PFD 407 DOS
To avoid the risk of accidents or damage
to the appliance, it is essential to read
these instructions before it is installed
and used for the first time.
en-GB, IE
M.-Nr. 12 273 110
Advertisement
Table of Contents
Related Manuals for Miele PFD 402
Summary of Contents for Miele PFD 402
- Page 1 Operating instructions Commercial dishwasher PFD 402 / PFD 402 DOS PFD 404 / PFD 404 DOS PFD 405 / PFD 405 DOS PFD 407 / PFD 407 DOS To avoid the risk of accidents or damage en-GB, IE to the appliance, it is essential to read these instructions before it is installed and used for the first time.
-
Page 2: Table Of Contents
Contents Notes about these instructions..................Symbols used on the commercial dishwasher..............Definition of terms ......................Correct use ........................Guide to the appliance ....................Machine overview......................Control panel ........................10 LEDs in buttons ......................... 11 Warning and Safety instructions..................12 Warning signs and symbols attached to the dishwasher..........15 Disposal of your dishwasher .................... - Page 3 Contents Cleaning agent and rinsing agent .................. 30 Dispensing systems ......................30 Dispensing module......................30 Cleaning agent ........................31 Filling the door dispenser ....................31 Tips for the Super Short programme ................32 Refill indicator........................ 33 Replacing the canister....................33 Rinsing agent........................34 Refill indicator........................
- Page 4 Contents Temperature unit........................ 56 Further settings ......................57 Menu structure ........................57 Filter programme lock ....................... 60 Standby/Off ........................60 Log book ........................... 61 Release programme ......................62 Set favourites ........................62 Programme parameters..................... 63 Selecting a programme ....................63 Main wash temperature....................
- Page 5 Contents Cleaning the control panel ....................78 Cleaning the machine front ....................78 Cleaning the wash cabinet ....................79 Cleaning the door and the door seal................. 79 Cleaning filters in the wash cabinet................... 79 Changing the air filter (depending on the model) .............. 81 Removing the plastic support ..................
-
Page 6: Notes About These Instructions
Notes about these instructions Warnings Warnings contain information which is important for safety. They alert you to the potential danger of injury to people or damage to property. Read these warning notes carefully and observe the procedural instructions and codes of practice they describe. Notes Notes provide information of particular importance that must be observed. -
Page 7: Symbols Used On The Commercial Dishwasher
Notes about these instructions Symbols used on the commercial dishwasher Symbol For warnings, see “Warnings and safety notes” VDE symbol EMC symbol of the VDE Do not dispose of electrical machines in household waste; they need to be disposed of separately, see “Disposal of your old machine”... -
Page 8: Correct Use
Correct use This Miele dishwasher with its short programme running times and powerful cleaning performance is intended for commercial use, for example in: - Retirement and care homes - Hospitals (only dishwashers with the Vario TD programme) - Restaurants and pubs... -
Page 9: Guide To The Appliance
Guide to the appliance Machine overview Air inlet for fresh air (depending on the Rinsing agent container model) Door lock latch Door lock Salt container Upper basket runners Container for powder cleaning agents Top machine spray arm Filter combination Upper basket water connection Air outlet and inlet grille with filter for fresh Lower machine spray arm air (depending on the model) -
Page 10: Control Panel
For starting or cancelling a programme Service interface (Depending on the model) Testing and transmission point for the button (door release) Miele Customer Service Department Open the door button (language selection) button (cancel or back) For selecting the display language... -
Page 11: Leds In Buttons
Guide to the appliance LEDs in buttons Light-emitting diodes are incorporated in the buttons. They indicate the status of the dishwasher. Button Display Status Display The dishwasher is switched on. (Reaction to The dishwasher is switched off. On/ Off button) Pulsing The dishwasher is in standby mode. -
Page 12: Warning And Safety Instructions
Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can Miele guarantee the correct functioning and safety of the appliance. The electrical safety of this dishwasher can only be guaranteed when correctly earthed. - Page 13 The dishwasher must not be used if the electrical connection cable is damaged. A damaged connection cable may only be replaced by a suitable connection cable of the same type. For safety reasons, such replacement may only be carried out by the Miele Customer Service Department or a qualified service technician.
- Page 14 The grille of dishwashers with active drying must not be blocked or sealed. Accessories Only use genuine Miele original spare parts and accessories with this dishwasher. Using spare parts or accessories from other manufacturers will invalidate the guarantee and Miele cannot accept liability.
-
Page 15: Warning Signs And Symbols Attached To The Dishwasher
Warning and Safety instructions Warning signs and symbols attached to the dishwasher Warning: Observe the operating instructions! Warning: Danger of electric shock! Warning: Hot surfaces: It can be very hot inside the wash cabinet when the door is opened! Risk of being cut: Wear cut-resistant protective gloves when transporting and setting up the machine! Disposal of your dishwasher... -
Page 16: Caring For The Environment
Use material- with household waste. specific collection points for valuable materials and take advantage of return options. Your Miele dealer will take the packaging material away. Instead, please make use of officially designated collection and disposal points to... -
Page 17: User Profiles
User profiles User groups Users can be divided into two groups: - Daily operators Daily operators must be instructed on operating and loading the dishwasher and trained regularly to guarantee safe daily use. - Experienced operators Experienced operators can additionally block access to programmes and modify programme parameters. -
Page 18: User Tips
User tips Operation Programmes 08:15 Operation is carried out via the touch Short Intensive 66°C 66°C display as well as via the buttons on the 0:13 h 0:21 h control panel. The sensor controls on the control panel Universal Super Short ... -
Page 19: Standby/Off
User tips Standby/Off Touch display If the dishwasher has not been used for Selection lists 10 minutes, it can be set to standby or switched off automatically. Programmes 08:15 Short Intensive In standby mode, the dishwasher remains 66°C 66°C switched on and the Start/Stop button 0:13 h... -
Page 20: Status Window
User tips Show me how Depending on the context, numbers entered directly may be rounded up or down. If, for example, it is only possible to enter values in increments of 10 (10, 20, Refill dishwasher salt. 30, etc.), the value is rounded down to 10 Then start the “Cold”... -
Page 21: Commissioning
Commissioning Installation and connection WiFi setup In the next step, you can connect your Before commissioning, the dishwasher must dishwasher to the WiFi network. be securely installed, and the water inlet and drain hoses and the mains cable Network/WiFi 08:15 correctly connected. -
Page 22: Setting The Time Of Day
Commissioning Setting the time of day Setting the water hardness The time of day is set in the set time of day Your local water authority can give you format. information about the exact water hardness in your area. Time 08:15 With varying water hardness, always set the... -
Page 23: Selecting Water Connections
Set-up successfully completed Following commissioning, the water connections can be reinstated by the Miele Customer Service Department. Select one of the available water connections, e.g.: Hot water Confirm the message with ... -
Page 24: Opening And Closing The Door
Opening and closing the door Door lock Closing the door Make sure that no objects or load items Depending on the model, the dishwashers protrude into the closing area of the door. are equipped with a comfort door lock with electronic door locking or a pull-open lock. -
Page 25: Pull-Open Lock
Opening and closing the door Insert the tool from the accessory pack Pull-open lock horizontally into the gap between the door In the case of dishwashers with a pull-open and the lid or worktop. lock, the door can be opened at any time, even during a programme sequence. -
Page 26: Filling The Container For Dishwasher Salt
Filling the container for dishwasher salt Water hardness Setting the water hardness In order to achieve excellent cleaning Water hardness can be set between 0 and results, the machine requires a supply of 12,5 mmol/l (0–70 °dH). soft water with a low calcium content. Hard The water hardness is preset to 2.5 mmol/l mains water results in the build-up of (14 °dH) ex-works. - Page 27 Filling the container for dishwasher salt Settings table °dH °f mmol/l Display °dH °f mmol/l Display 0 0 0 0 65 6.5 1 2 1 67 6.7 2 4 2 68 6.8 3 5 3 70 7.0 4 7 4 72 7.2 5...
-
Page 28: Salt Refill Indicator
Filling the container for dishwasher salt Salt refill indicator Machine blocked if salt is not available If the level in the salt container is low and a reactivation is carried out, the following If the salt in the water softener has been message appears on the display: used up, a fault appears on the display and the machine blocked from performing... - Page 29 Filling the container for dishwasher salt Filling the salt container Filling the salt reservoir Use only special, coarse-grained salt with a granula size of approx. 1- 4 mm. Do not under any circumstances use other types of salt such as table salt, agricultural or gritting salt.
-
Page 30: Cleaning Agent And Rinsing Agent
Specific types of soiling may require chemicals and take all the protective different combinations of cleaning agents measures stipulated by the process and additives. The Miele Customer Service chemical manufacturers. Department will be able to advise you. Depending on the model, dishwashers are... -
Page 31: Cleaning Agent
(depending on the model). Only use cleaning agent tablets that are quick dissolving. Suitable tablets are Power supply connection for DOS 4, available from the Miele Professional rinsing agent. product range. Connections for dispensing hoses. Filling the door dispenser ... -
Page 32: Tips For The Super Short Programme
Cleaning agent and rinsing agent The level markers in the powder container Make sure that all of the cleaning with the door in the horizontal position agent has dissolved at the end of the indicate the fill level in millilitres (ml). The programme. -
Page 33: Refill Indicator
Dispensing modules are Take the lid off the canister and remove connected by the Miele Customer Service the suction lance. Place the suction lance Department and can be retrofitted at any on the open wash cabinet door. -
Page 34: Rinsing Agent
Cleaning agent and rinsing agent Filling the door dispenser Rinsing agent Rinsing agent is necessary to ensure water Never add cleaning agent. does not cling and leave marks on load This will always destroy the rinsing agent items, and to help load items dry faster after container! the final rinse. -
Page 35: Refill Indicator
Cleaning agent and rinsing agent Replacing the canister Place the rinsing agent container (note the colour marking) on the open wash cabinet door or on a surface which is robust and easy to clean. Take the lid off the canister and remove ... -
Page 36: Loading The Dishwasher
Loading the dishwasher The spray arms must not be blocked by Loading the dishwasher items which are too tall or hang through Remove coarse food residues from the baskets. If in doubt, test for free crockery. movement by manually rotating the spray There is no need to pre-wash items under arms. -
Page 37: We Recommend
Loading the dishwasher We recommend - When purchasing new crockery and cutlery, make sure they are dishwasher- safe if you want to wash them in the dishwasher. - Clouding may occur on glasses after frequent washing in the dishwasher. When washing delicate glasses in the dishwasher, ensure that only a special glass-care programme with very low... -
Page 38: Upper Basket
Loading the dishwasher Cup rack Upper basket Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls etc. Light, heat- resistant plastic items can also be loaded in the upper basket. Smaller shallow pots and pans can also be washed in the upper basket. -
Page 39: Adjusting The Upper Basket
Loading the dishwasher Adjusting the upper basket In order to obtain more space for taller items in the lower or upper basket, the upper basket can be adjusted between two positions that are approx. 5 cm apart. Pull out the upper basket. ... -
Page 40: Lower Basket
Loading the dishwasher Lower basket Place larger and heavier load items such as plates, serving platters, pots, bowls, etc. in the lower basket. Only place thin, delicate glasses in a suitable insert or lower basket. Always arrange plates with the top side facing inwards, as shown in the pictures, to achieve the best cleaning result. -
Page 41: Loading Plastic Trays
For further information on baskets, please contact your Miele dealer or the Miele Customer Service Department. Examples: (lower baskets) Push all four extenders into the base ... -
Page 42: Operation
Operation Switching on Programme 08:15 Open the stopcock if it is closed. The dishwasher needs to be connected to AutoOpen Dry+ the electricity supply. Universal 66°C Press and hold the button until the 0:19 h following appears on the display: ... -
Page 43: Starting A Programme
Operation Starting a programme Status 08:15 Press the Start/Stop button (the LED of the Start/Stop button will light up). Start at 12:30 Once it has been started, a programme Universal can no longer be changed. 66°C 0:19 h You can interrupt (see “Interrupting a programme”) or cancel (see “Cancelling a ... -
Page 44: Programme Sequence Display
Operation Programme sequence display End of a programme Once a programme has started, the display After a programme has ended normally, the shows the programme name, the name of LED of the Start/Stop button will go out and the current wash phase and the time left the following will appear on the display. -
Page 45: Interrupting A Programme
Operation Interrupting a programme A programme which is already running should only be interrupted if strictly Temperature equalisation: Programme will continue in min necessary, e.g. if the load items are moving significantly. Danger of scalding, burning and chemical burns The load items, the load carrier and the interior of the wash cabinet may be very If the temperature inside the wash cabinet is... -
Page 46: Cancelling A Programme
Operation Cancelling a programme If you change the programme and the cleaning agent dispenser flap has already Only cancel a programme which has already opened, add more cleaning agent as started if strictly necessary, e.g. if you want needed. to change the programme. In the event of a fault, the programme will be cancelled automatically. -
Page 47: Machine Functions
Machine functions The Machine functions menu includes AutoClose relevant functions to support daily routine tasks. The factory settings are indicated by a tick . A description of how to configure settings is provided after the overview. *) Depending on the model Menu structure ... -
Page 48: Filter Interval
Machine functions Filter interval Dispensing paths The air filters for active drying inside the The dispensing systems for liquid media machine have a limited service life. For this can only dispense reliably if the dispensing reason, the filters must be replaced system has been purged of air and contains regularly. -
Page 49: Rinsing Dispensing Paths
Machine functions The menu is saved under the following input 08:15 path. Machine functions Start filling dispensing paths? Dispensing systems Rinse dispensing paths Rinse dispensing paths 08:15 Select to start the process. Clean. agent The dispensing system is filled canister Fill dispensing... -
Page 50: Dry
Machine functions Extension Dry+ The fan running time is preset for each Dry+ active drying is only available on programme and it is only possible to dishwashers with a drying fan (depending extend this running time or to cancel an on the model). -
Page 51: Autoopen
Machine functions AutoOpen AutoClose AutoOpen is an additional assisted drying This can be used to determine whether the function. At the end of a programme, the door should be drawn into the final closed door opens slightly to allow residual position by the automatic door lock moisture to escape from the wash cabinet immediately after closing or whether it... -
Page 52: Settings
Settings Basic parameters for machine control are Temperature unit stored in the Settings menu. °C The factory settings are indicated by a tick . A description of how to configure °F settings is provided after the overview. Menu structure ... -
Page 53: Time Of Day
Settings Set the time of day Time of day To set the format for the time of day: The time of day is required for the display and the delay start, for example. The date The menu is saved under the following input format and the current time of day have to path. -
Page 54: Date
Settings Set the date Date The menu is saved under the following input The date format and the current date have path. to be set. Settings Select the date format The menu is saved under the following input Date path. -
Page 55: Display Brightness
Settings Display brightness Volume You can also set the brightness of the An acoustic signal transmitter is integrated display. in the control panel, which can provide acoustic feedback in the following The menu is saved under the following input situations: path. -
Page 56: Welcome Tone
Settings Welcome tone Temperature unit There is a brief melody when the machine is The temperature can be shown on the switched on and off. You can use this option display in °C (degrees Celsius) or °F to switch this melody off and back on again. (degrees Fahrenheit). -
Page 57: Further Settings
Further settings The Further settings menu incorporates Release programmes all administrative processes and settings. All programmes Access to the Further settings menu is protected by a PIN code. Selection You must enter the correct PIN code to ... - Page 58 Further settings Dispensing systems PIN code Cleaning agent door Change PIN code Rinse aid door Release further settings? Refill indicator Door lock code Dispens. concentration ...
- Page 59 Further settings Network/WiFi Software version Set up 1-SBAE ID XXXX Via WPS 2-EL ID XXXX Via Soft AP 3-EFU ID XXXX Activate 5-LG ID XXXX Deactivate Data plate Connection status Factory default Set up again ...
-
Page 60: Filter Programme Lock
Further settings Filter programme lock Standby/Off The filter combination in the wash cabinet If the dishwasher has not been used for filters coarse dirt particles out of the wash 10 minutes, it can be set to standby or water. If dirt particles enter the circulation switched off automatically. -
Page 61: Log Book
and arrow buttons and select it by tapping on it. The Miele Customer Service Department can also use the log book to calculate a The values in the log book cannot be recommendation for service intervals. -
Page 62: Release Programme
Further settings Release programme Set favourites Favourite programmes There is an option to block individual Under , you can define programmes. Blocked programmes are no the order of the programmes and choose longer available in the programme selection which programmes should be immediately screen. -
Page 63: Programme Parameters
08:15 Cleaning temperature experienced users or by the Miele Customer Service Department. Start by selecting the programme you want to change. °C Selecting a programme The menu is saved under the following input path. -
Page 64: Final Rinse Temperature
Further settings Final rinse temperature Increased water level The final rinse temperature is reached by It is then advisable to increase the water heating up the wash water. The temperature level when a lot of water is absorbed due to needs to be adjusted to the task. -
Page 65: Changing Names
Further settings Changing names Resetting parameters You can change a programme name if You can reset individual programmes to the required. The preceding symbol cannot be factory default settings. The programme changed. parameters and changed programme names are reset. Programme name Select the option. -
Page 66: A0 Value Display
Further settings A0 value display Dispensing systems The A0 value is a measure for the The following menu allows you to activate, deactivation of micro-organisms in fill and rinse dispensing systems, to change disinfection processes using moist heat. their names if required and to set the This value is used in thermal disinfection dispensing concentration for all processes in machine-based reprocessing... -
Page 67: Door Dispenser
Further settings Door dispenser Rinse aid door Cleaning agent door Refill indicator One of the following messages is displayed The refill indicator indicates a lack of rinsing if you have selected Cleaning agent door agent in the door dispenser. If you want to stop dispensing rinsing agent via the door dispenser, you need to switch off the refill ... -
Page 68: Activating Dispensing From The Canister
Further settings Activating dispensing from the canister Deactivating dispensing from the canister To activate dispensing of liquid process You can subsequently switch dispensing chemicals from external canisters, you must proceed as follows. from the canisters to the door dispensers or deactivate it completely. -
Page 69: Dispensing Concentration
Further settings Dispensing concentration Cycles until empty The dispensing concentration for liquid When dispensing liquid process chemicals process chemicals is set in the same way from external canisters, the fill level in the for all dispensing systems. The setting canister is monitored. You can use the applies to all programmes. -
Page 70: Reactivation Notification
Further settings Reactivation notification Memory In order to plan wash phases more If you are always using the same effectively, you can have the remaining programme in a continuous sequence, you number of wash cycles before the next can use the memory function. This reactivation displayed as a notification. -
Page 71: Pin Code
The factory-assigned PIN code is 800. Extended settings If a PIN code is lost, a new code must PIN code be issued by the Miele Customer Service Department. PIN code 08:15 Entering the PIN code Change PIN code ... -
Page 72: Changing A Pin Code
If a PIN code is lost, a new code must be added. For this reason, a door lock can be issued by the Miele Customer Service set up that requires a PIN code to be Department. -
Page 73: Networking/Wifi
Network/WiFi 08:15 integrated WiFi module. You can connect your dishwasher to your Set up local network in order to use digital solutions from Miele. An overview of these digital solutions is available on the webpage: https://www.miele.co.uk/p/ Select the Set up menu option. -
Page 74: Soft Ap
Further settings Once the connection has been Soft AP Connection successfully established, If Connection via WPS is not possible, you established will appear on the display. can connect the dishwasher to your local Confirm the message with OK. network Via Soft AP. If the connection fails, you have probably A Soft-AP (Software-enabled Access Point) not activated WPS on your router quickly... -
Page 75: Remoteupdate
Further settings RemoteUpdate Showroom programme This menu option only appears if the For demonstration purposes only. dishwasher has been integrated into the The dishwasher is equipped with a demo WiFi network. mode for showroom use. When a new version of the dishwasher The menu is saved under the following input control system is available, you can decide path. -
Page 76: Factory Defaults
Further settings Factory defaults If necessary, the modified programme parameters or all dishwasher parameters Reset all settings? can be reset to the factory default settings. The factory default settings should only be restored in consultation with the Customer Service Department. The menu is saved under the following input Selecting resets the programme... -
Page 77: Cleaning And Care
Miele Remove any soiling from the control panel Customer Service Department. and from the machine front straight away This maintenance will cover the following: where possible. -
Page 78: Wipe Lock
Cleaning and care Wipe lock Cleaning the machine front You can lock the display when cleaning To clean the stainless steel front, use a the control panel and the display to damp cloth with a solution of washing-up prevent accidental operation during liquid and hot water, or with a non- cleaning. -
Page 79: Cleaning The Wash Cabinet
When Programme lock filter is activated, it cleaner (available from Miele). is not possible to use the dishwasher without a micro-fine filter! Cleaning the door and the door If the micro-fine filter is not inserted... - Page 80 Cleaning and care Cleaning the flat and micro-fine filters Cleaning the spray arms Remove the coarse filter as described The dishwasher has three different spray before. arms. Particles of food can get stuck in the spray arm nozzles and bearings. The spray arms should therefore be checked and cleaned regularly.
-
Page 81: Changing The Air Filter (Depending On The Model)
Cleaning and care Removing the plastic support Use a pointed object to push food particles into the spray arm nozzles. Push the snap-fit down and pull the plastic support forwards to remove it . Rinse the spray arms thoroughly under ... -
Page 82: Problem Solving Guide
With the aid of the following guide, most minor problems that can occur during daily operation can be corrected without contacting Miele. You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. -
Page 83: Faults With Water Inlet Or Drainage
Problem solving guide Faults with water inlet or drainage Problem Cause and remedy One of the following fault Before rectifying the problem: messages or notifications Switch the dishwasher off with the button. appears on the display: F404 Water inlet, cold too Water inlet fault. -
Page 84: Cancel With Fault Number
The flow pressure at the water connection is too low (see “Technical data”). Contact the Miele Customer Service Department for advice. Fault F 413–414 Water inlet fault. If the flow pressure is too high, one of these fault numbers will appear on the display and the programme will be cancelled. - Page 85 Do not place (heavy) objects in front of the door of the dishwasher. Fault F 446 The door lock is defective. Call the Miele Customer Service Department. Fault F 492, 541 The programme has not started properly. There might be water in the wash cabinet.
-
Page 86: Door
Close the door and try to open it again using the button. If it is still blocked: Contact the Miele Customer Service Department. Anti-trap guard: To continue, This is not a fault! open door. The door is locked while the door locking mechanism retracts to the lock position. -
Page 87: General Problems With The Dishwasher
Problem solving guide General problems with the dishwasher Problem Cause and remedy The dishwasher does not The dishwasher is switched off after 10 minutes to save respond to any button. The energy. indicator lights and the Press the button to switch the dishwasher back on. ... - Page 88 Problem solving guide Problem Cause and remedy Water remains in the wash Before rectifying the problem: cabinet at the end of a Switch the dishwasher off with the button. programme. The filter combination in the wash cabinet is clogged. (This does not apply to the Clean the filter combination (see “Cleaning and care”).
-
Page 89: Noises
Problem solving guide Noises Problem Cause and remedy Knocking noise in the A spray arm is knocking against an item in a basket. wash cabinet. Interrupt the programme, and rearrange the items which are obstructing the spray arm. Rattling noise in the wash Items are insecure in the wash cabinet. -
Page 90: Unsatisfactory Washing Result
Problem solving guide Unsatisfactory washing result Problem Cause and remedy The crockery is not clean. The crockery was not loaded correctly. Please observe the instructions in “Loading the dishwasher”. The programme was not suitable for the load. Select a suitable programme (see “Programme chart”). ... - Page 91 Problem solving guide Problem Cause and remedy White residue is visible on The rinsing agent dosage is set too low. crockery and cutlery, Increase the dosage (see “Further settings, Additional clouding occurs on glass- functions, Dispensing system”). ware; film can be wiped There is no salt in the salt reservoir.
-
Page 92: Maintenance
Maintenance Cleaning the water inlet filter Cleaning the drain pump and non- return valve A filter is incorporated in the screw thread to protect the water intake valve. If the filter is If the water has not been pumped away at soiled, insufficient water flows into the wash the end of a wash programme (excluding cabinet. - Page 93 Maintenance Check for foreign objects blocking the drain pump before replacing the non- return valve. Carefully replace the non-return valve and secure it with the locking clamp.
-
Page 94: Customer Service
- Your Miele dealer - The Miele Customer Service Department Contact details for Miele are provided at the back of these operating instructions. When contacting the Customer Service Department, you will need the model number and 8-digit machine number of the dishwasher. -
Page 95: Programme Chart
Programme chart Programme Application Cleaning agent (if liquid cleaning agent is not dispensed) The following dosages are based on Miele detergents. Please follow the manufacturer's instructions. “Quick programme” for lightly soiled load items with fresh, easily 20–25 g Short removed food residues. -
Page 101: Installation
*INSTALLATION* Installation Installation Built-under installation Damage caused by condensation. Risk of the machine tipping. In order to reduce the risk of damage To ensure stability, a built-under from condensation, the furniture in the dishwasher must only be installed area around the dishwasher should be beneath a continuous worktop that is designed for commercial use. -
Page 102: Adjustable Plinth Panel (Depending On The Model)
*INSTALLATION* Installation Adjustable plinth panel Levelling and securing the (depending on the model) dishwasher Dishwashers with internal dispensing or To guarantee stability, the dishwasher must active drying have an adjustable plinth be secured to the worktop after levelling. panel. Level the dishwasher. ... -
Page 103: Moving The Dishwasher
*INSTALLATION* Installation Depending on the specific built-under installation situation, the stainless steel cover plate supplied can be attached to the lower edge of the worktop. The stainless- steel cover plate protects the lower edge of the worktop against steam damage. Moving the dishwasher Before moving the dishwasher, screw in the adjustable feet fully so that they do not get... -
Page 104: Electrical Connection
- Equipotential bonding should be carried following message, e.g.: out if required. - The mains connection cable may only be replaced by an original Miele spare part. Peak-load negotiation: heating mode temporarily - For technical data, see the data plate or disabled. -
Page 105: Plumbing
1000 kPa (overpressure). If the water pressure does not lie in the 200– 1000 kPa range, contact the Miele Customer Service Department for advice. - The dishwasher is supplied as standard for connection to cold water (blue coded hose) and hot water up to max. -
Page 106: Connecting The Drain Hose
*INSTALLATION* Plumbing Water Regulations compliance in the UK Connecting the drain hose For the dishwasher to comply with the - The dishwasher drainage system is fitted Water Supply (Water Fittings) Regulations with a non-return valve, which prevents and Bylaws, the supplied double check dirty water from flowing back into the valves must be fitted to the hot and cold dishwasher via the drain hose. -
Page 107: Technical Data
Machinery Directive 2006/42/EC UKCA mark (UK only) The Supply of Machinery (Safety) Regulations 2008 Manufacturer address Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany 2.000 * If installation site is above m, the boiling point of the wash water will be lower. For this reason, the programme... - Page 108 United Kingdom Malaysia Miele Sdn Bhd Miele Co. Ltd., Fairacres, Marcham Road Suite 12-2, Level 12 Abingdon, Oxon, OX14 1TW Menara Sapura Kencana Petroleum Professional Sales, Tel: 0845 365 6608 Solaris Dutamas No. 1, Jalan Dutamas 1 E-mail: professional@miele.co.uk 50480 Kuala Lumpur, Malaysia Internet: www.miele.co.uk/professional...