19.2.3
HASP Driver Installation
Install the HASP driver for key 5094 "Sentinel_LDK_Run-time_setup":
Win7: Right click on HASPUserSetup.exe and choose "Run as Administrator"
Win10: Right click on "HASPUserSetup.exe" and choose properties then go into the
Compatibility tab. Set as shown in Figure 21 above and click "OK".
Note: If the HASP driver cannot be installed, you may need to download a recent
version of Sentinel_LDK_Run-time software, it is free downloaded from
ThalesGroup website.
19.2.4
EBLWin software Installation
1. Unzip EBLWin V2.10.1 zip file and double click on the file named EBLWin.msi,
the following dialog display
36
HASP driver may not install properly in the latest revisions of Windows 10 or Windows 11. Check Brooks
website to install the suitable driver.
(for 5094 key)
36
Figure 21 Installing HASPUserSetup in compatibility mode
95
Operation Manual
FT1020G3 Rev 2.10.4