Controllers
5.3 Wiring instructions
Proceed as follows to mount the standard rail mounting:
Steps
1.
Select either a vertical or horizontal
orientation for mounting the control‐
ler on the standard mounting rail.
2.
Screw the SIDOOR standard rail
mounting tightly to the controller
with 2 (M4 x 6) screws. Use the pre‐
drilled holes in the controller for this
purpose.
5.3
Wiring instructions
NOTICE
Material damage
Use only cables with a temperature range ≥ 85°C
130
Figure
Vertical
Horizontal
ATD4xxW for industrial applications
System Manual, 06/2022, A5E51901827B AA