Advertisement
Installing an Optional Memory Module
To install an optional memory module, make sure the computer is in Boot mode. Then
follow the steps below and refer to Figures 4-6 to 4-8.
1.
Position the connector on the bottom of the module over the corresponding
connector on the computer (align the holes on the side of the module over the
screw holes on the brace).
NOTE: Do not touch the connectors on the memory module or on the
computer. Debris on the connectors may cause memory access problems.
2.
Place your fingers above the connector and press firmly but gently to assure a
solid connection. The module should be seated level.
3.
Secure the module to the brace with two M2x4 silver screws.
4.
Lay the cover in place and secure it with two M2x4 silver screws (Figure 4-6).
5.
Install the battery pack and optional PC card as described in Sections 4.2 and 4.3.
110 Series
Figure 4-8 Inserting the memory module
4-11
Advertisement
Related Manuals for Toshiba Satellite 110 Series
Related Products for Toshiba Satellite 110 Series
- Toshiba Satellite Radius 11 L10W-B
- Toshiba Satellite Radius 11 CL15W-C Series
- Toshiba Satellite Radius 11 L15W-C Series
- Toshiba Satellite Radius 11 CL1 C Series
- Toshiba Satellite Radius 11 L1 C Series
- Toshiba Satellite Radius 11 L10W-C Series
- Toshiba Satellite Radius 11 CL10W-C Series
- Toshiba Satellite Radius 11 CL10W-B