Table of Contents
Advertisement
26
en | Web-GUI configuration
4.4
SIP
Use the SIP page to configure the system for SIP operations. By default, the SIP is active using
a pre-configured P2P SIP account.
From this page you can access:
–
–
4.4.1
SIP settings
Use the SIP settings page to view, modify, enable and disable SIP service settings.
SIP service enabled check box
The SIP service enabled check box determines whether the SIP client should be running or
not.
The type of transport protocols the SIP client is allowed to use is set in the dropdown menu
upon account creation.
By default, SIP supports TCP, UDP and TLS protocols.
Server certificate
Server certificates are digital authorizations that allow secure transmissions between the SIP
server and the IP Horn loudspeaker/IP Amplifier module. When you select the Verify server
certification check box, the device verifies the SIP server is authorized to transmit and receive
audio and data by checking the digital certificate. Select the proper certificate from the
Certificate for this device drop down menu.
Manage the available certificates on the Certificates, page 36 .
Advanced SIP configuration settings
Further configuration settings can be adapted to match the SIP server requirements.
Notice!
i
The device is unable to establish a direct connection with an online SIP proxy. Use SIP
trunking to connect to the public telephone network via a SIP provider.
4.4.2
SIP accounts
Use the SIP accounts page to provide information on the current existing accounts for this
device. From this page, you can enable and disable existing SIP accounts and add, modify, or
delete accounts.
You can create two type of accounts:
–
–
2023.02 | V01 | F.01U.389.835
SIP settings
SIP accounts
P2P account - applicable for direct SIP phone to SIP device (softphone, USB phone, SIP-
based telephone hardware, ATA phone adaptors, etc.) communication. To set up a P2P
account, two parameters are mandatory: Username (Label) and the Transport protocol.
Registrar account - applicable if the device connects to a SIP server.
To set up a Registrar account:
–
The Username and Password need to match to the SIP server's dedicated account
for the device.
–
You must select the Transport protocol.
–
You must assign an IP address of the SIP server in the Registrar.
LHN‑UC15L‑SIP | LHN‑UC15W‑SIP | AMN‑P15‑SIP
User manual
Bosch Security Systems B.V.
- Quick Links:
- Ip Address Detection
Hide quick links:
Advertisement
Table of Contents
