2. Disconnect 2 connectors (A) at Front Loading
motor Board and the Interconnection Board.
Front Loading Motor Part
Connectors (A)
3. Push and rotate the red plastic gear in front of the
Front loading motor counterclockwise until the
screw (A) which is used to fix the Front Loading
Unit can be seen.
Interconnection Board
Rotate the Gear
4. Unscrew the 4 screws (A) and (B), then remove
the Front Loading Unit.
1-5. Removal of Mechanism Unit
Please refer to Major Mechanical Parts Replacement
& Adjustment Procedures (SECTION 3) regarding
each parts replacement procedure.
1. Loosen 2 screws (A) and remove the Carriage
support angle.
Screws (A)
DIS-2
Screws (B)
Screws (A)
Carriage support angle