Standalone Mounting; Mounting When Using An Enclosure - ABB RMC-100 User Manual
Remote modular controller
Hide thumbs
Also See for RMC-100:
- Startup manual (37 pages) ,
- Quick start manual (2 pages) ,
- Startup manual (40 pages)
Table of Contents
Advertisement
3.5.2
Standalone mounting
To mount the RMC:
1.
Position the RMC on the DIN rail.
2.
Push the RMC onto the DIN rail until it snaps into place
Figure 3-1: Mount the RMC
COMM EXPANSION
IMPORTANT NOTE: To remove the RMC, insert a slotted screwdriver into the access slot of the
DIN rail and release the clip to loosen. See section
3.5.3
Mounting when using an enclosure
The Xcore enclosure has tags for wall-mounting
specifications. The RMC is usually already mounted on an internal DIN rail inside the enclosure. To use
non-ABB enclosures, follow the vendor's mounting instructions.
Figure 3-2: Xcore enclosure top mounting tags and interior view
Legend for Figure 3-2: Xcore enclosure top mounting tags and interior view
ID
Name
1
Tag
2
RMC installed
3
DIN Rail
3 2 | R MC-1 00 | 2 10 55 5 2MN A E
(Figure
3-1).
8.8.3 Remove the RMC from the DIN
(Figure
3-2). Mount the enclosure per field
rail.
Advertisement
Table of Contents
