View Of The Simatic Drive Controller From Below; Covers - Siemens SIMATIC S7-1500 Equipment Manual
Drive controller
Hide thumbs
Also See for SIMATIC S7-1500:
- System manual (523 pages) ,
- Function manual (402 pages) ,
- Manual (188 pages)
Table of Contents
Advertisement
3.7.4
View of the SIMATIC Drive Controller from below
There is a DisplayPort interface (X140) and an X127 P1 interface sealed with a mechanical
lock located on the underside of the SIMATIC Drive Controller.
• The X140 interface is used exclusively for service purposes by Siemens and cannot be used
to connect a display.
• The X127 P1 interface is not available for the SIMATIC Drive Controller.
①
②
Figure 3-7 SIMATIC Drive Controller view from below
3.7.5
Covers
The interfaces and operator controls on the front are concealed with covers. You must open
the covers before you can connect cables to the interfaces or reach the operator controls of
the Drive Controller.
NOTICE
Possible damage to electronic components (ESD)
Electrostatic discharges can damage electronic components in the device.
Open the cover only when you have grounded yourself using one of the following measures:
• Ground yourself on the cabinet or ground terminal.
• Wear an ESD wrist strap.
• Wear ESD shoes or ESD grounding strips in ESD areas with a conducting floor.
SIMATIC Drive Controller
Equipment Manual, 11/2022, A5E46600370-AC
X127 P1: Sealed interface
X140: DisplayPort interface
3.7 Operator controls, displays and connection elements
Product overview
35
Advertisement
Table of Contents
