Bosch Active Line Owner's Manual page 15
Hide thumbs
Also See for Active Line:
- Original operating instructions (212 pages) ,
- Manual (179 pages) ,
- Original instructions manual (160 pages)
Table of Contents
Advertisement
The following basic settings are available:
– "– Clock +": The current time can be set here. Pressing
and holding the setting buttons fast-forwards the setting
speed.
– "– Wheel circum. +": You can change this value pre-set
by the manufacturer by ±5 %. This menu item is dis-
played only when the on-board computer is in the
holder.
– "– English +": You can change the language of the text
indications. You can choose between German, English,
French, Spanish, Italian, Portuguese, Swedish, Dutch
and Danish.
– "– Unit km/mi +": The speed and distance can be dis-
played either in kilometers or miles.
– "– Time format +": The time can be displayed either in
a 12-hour or 24-hour format.
– "– Shift recom. on/off +": You can switch the indica-
tion of a shift recommendation on and off.
– "Power-on hours": Indicates the total travel time with
the eBike (can not be changed).
– "Gear calibration" (only NuVinci H|Sync): Here you
can calibrate the continuously variable transmission.
Confirm the calibration by pressing the "Bike lights" but-
ton. Then follow the instructions.
In the event of an error, it can also be necessary to per-
form calibration when riding. In this case, you also con-
firm the calibration by pressing the "Bike lights" button
and then follow the instructions on the display.
This menu item is displayed only when the on-board
computer is in the holder.
– "– Starting gear +": This is the starting gear which can
be set when using SRAM DD3 Pulse and Shimano Di2.
The automatic shift-back function is switched off in the
"––" position. This menu item is displayed only in con-
nection with SRAM DD3 Pulse and Shimano Di2. This
menu item is displayed only when the on-board comput-
er is in the holder.
– "Displ. vx.x.x.x": This is the software version of the dis-
play.
– "DU vx.x.x.x": This is the software version of the drive
unit.This menu item is displayed only when the on-board
computer is in the holder.
– "DU # xxxxxxxxx": This is the serial number of the drive
unit. This menu item is displayed only when the on-
board computer is in the holder.
– "
Service MM/YYYY": This menu item is displayed
when the bike manufacturer has set a fixed service ap-
pointment.
Bosch eBike Systems
– "
Serv. xx km/mi": This menu item is displayed when
the bike manufacturer has set a fixed service appoint-
ment after a certain mileage has been reached.
– "Bat. vx.x.x.x": This is the software version of the bat-
tery pack.This menu item is displayed only when the on-
board computer is in the holder.
– "Gear vx.x.x.x": This is the software version of the au-
tomatic transmission. This menu item is displayed only
when the on-board computer is in the holder. This menu
item is displayed only in conjunction with an automatic
transmission.
Error Code Indicator
The components of the eBike system are continuously and
automatically monitored. When an error is detected, the re-
spective error code is indicated in text indicator d.
To return to the standard indicator, press any button on the
on-board computer 3 or on the operating unit 10.
Depending on the type of error, the drive unit is automati-
cally shut off, if required. Continued travel without assis-
tance from the drive unit is possible at any time. However,
have the eBike checked before attempting new trips.
WARNING: Have all checks and repairs performed
only by an authorized Bosch eBike dealer.
Notes on Riding with the eBike System
When does the eBike Drive Unit Operate?
The eBike drive unit assists you when riding, as long as you
step on the pedals. Without pedaling, there is no assis-
tance. The motor output always depends on the amount of
your pedaling power.
When applying less pedaling power, the assistance or sup-
port will be lower than when applying a lot of pedaling pow-
er. This applies independent of the assistance level.
The eBike motor assistance automatically switches off at
speeds in excess of 20 mph. When the speed falls below
20 mph, the motor assistance is automatically available
again.
The eBike can also be ridden as a normal bicycle without as-
sistance at any time, by either switching off the eBike sys-
tem or setting the assistance level to "OFF". The same ap-
plies when the battery pack is empty.
English–15
0 276 001 USAen | (17.6.15)
Advertisement
Table of Contents
