Installation
32
Installation requirements
The tumble dryer must only be installed and commissioned by the
Miele Professional Service Department or an authorised technician.
The tumble dryer must be installed in accordance with all relevant
regulations and standards.
The dryer must only be operated in a room that has sufficient
ventilation and which is frost-free.
General operating conditions
This dryer is intended only for use in a commercial environment and
must only be operated indoors.
Do not install the tumble dryer in a room where there is a risk of frost.
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Useful tip: Have the installation site inspected and seek the advice of
a professional in instances where increased noise may cause a
nuisance.
Transport
The tumble dryer must not be transported without a transport
pallet.
Suitable transport aids must always be used during transportation.
At the installation site, the tumble dryer must be lifted from the
transport pallet using suitable lifting gear.
Installing the tumble dryer
Place the tumble dryer on a perfectly level, secure, and horizontal
surface that is able to withstand the specified floor load.