Using for the first time
18
Risk of injury or damage to property due to improper
installation.
Incorrect installation of the tumble dryer can lead to personal injury
or damage to property.
Before commissioning the tumble dryer for the first time, make sure
it has been installed correctly.
Connect the tumble dryer correctly.
Please observe the instructions in "Installation".
Complete the initial commissioning process. During the initial
commissioning process, you will need to define the settings for daily
use of the tumble dryer. Some settings can only be modified during
the initial commissioning process. After that, they can only be
changed by Miele Professional Service.
These settings are also described in "Supervisor level".
Switching on the tumble dryer
Press the button.
The welcome screen will light up.
Setting the display language
You will be asked to select the display language. You can change the
language at any time (see "Supervisor level - Language").
Language
english
deutsch
(CA)
english
english
(AU)
(GB)
Swipe left or right across the display with your finger until the
language you want appears.
Briefly touch the required language with your finger.
The selected language will be highlighted in orange and the display
will change to the next setting.
Reference to optional external devices
Before initial commissioning, connect the XCI box and/or slide a
communication module into the slot on the back of the tumble dryer.
For this purpose, the tumble dryer must be disconnected from the
power supply. Then start the commissioning process.
español
français
(F)
OK