Table of Contents
Advertisement
charge indicator (3) goes out and a white moving light
in the direction of travel shows that it is ready.
To activate walk assistance, one of the following ac-
tions must occur within the next 10 s:
– Push the eBike forwards.
– Push the eBike backwards.
– Perform a sideways tilting movement with the
eBike.
After activation, the motor begins to push and the
continuously filling white bars change color to ice-
blue.
If you release the (8) button, walk assistance is
paused. You can reactivate walk assistance within
10 s by pressing the (8) button.
If you do not reactivate walk assistance within 10 s,
walk assistance automatically switches off.
Walk assistance is always ended if:
– the rear wheel jams;
– the bicycle cannot move over ridges;
– a body part is blocking the bike crank;
– an obstacle continues to turn the crank;
– you start pedaling;
In order to be able to use the following eBike func-
tions, a smartphone with the eBike Flow app is re-
quired.
Connection to the app occurs via a Bluetooth® con-
nection.
Switch on the eBike system and do not start riding
the eBike.
Begin Bluetooth® pairing by long pressing (> 3 s) the
on/off button (1). Release the on/off button (1) as
soon as the topmost bar on the battery charge indica-
tor shows the pairing process by flashing blue.
Confirm the connection request in the app.
Activity tracking
In order to record activities, it is necessary to register
and log into the eBike Flow app.
Bosch eBike Systems
Establishing a smartphone connection
– the (9) button or on/off button (1) is pressed.
Walk assistance has a roll-away lock, which means
that even after successfully using walk assistance, the
drive system actively brakes backwards rolling for a
few seconds and you cannot push the eBike back-
wards or can only do so with difficulty.
The push assistance function is subject to local regu-
lations; the way it works may therefore differ from the
description above. It can also be deactivated.
ABS – Anti-lock braking system (optional)
If the bicycle is equipped with a Bosch eBike ABS, the
ABS LED (4) lights up when the eBike system starts.
After setting off, the ABS internally checks its func-
tion and the ABS LED goes out.
In the event of a fault, the ABS LED (4) lights up to-
gether with the orange flashing assistance level
LEDs (5). You can acknowledge the error with the se-
lect button (2); the flashing assistance level LED (5)
goes out. While the ABS LED (4) is lit up, the ABS is
not in operation.
For details on the ABS and how it works, please refer
to the ABS operating instructions.
To record activities, you must consent to the storage
of your location data in the app. Without this, your ac-
tivities cannot be recorded in the app. For location
data to be recorded, you must be logged in as the
user.
<eBike Lock>
<eBike Lock> can be activated for all users via the
eBike Flow app. A key to unlock the eBike is saved on
the smartphone for this purpose.
<eBike Lock> is automatically active in the following
cases:
– When switching off the eBike system via the operat-
ing unit
– When automatically switching off the eBike system
– By removing the on-board computer
English – 11
0 275 U07 3RL | (09.03.2022)
- Quick Links:
- Using Your Operator's Manual
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
