Table of Contents
Advertisement
PROGRAMMING PROCEDURES
SECTION 200-255-309
FEBRUARY 1992
ANS (Answer
Supervision)-Determines
whether
or not answer
supervision
will be pro-
vided to the distant trunk on incoming
calls. (This
prompt is for TIE, CCSA, and DID trunks only.) If
"N" is entered,
then the system will not
return
answer supervision.
Enter: Y or N.
4. Print Trunk Data Block (Table 9-4)
WAT-All
WATS Trunk Data Blocks will be output.
4.01 To use the Print Trunk
Data Block
(PTRK
Program):
l
Perform the Authorization
Procedure
(Level 1 or
2).
Enter: PTRK (in response
to OK prompt).
l
When
the REQ prompt
is received
after the
program
is loaded:
Enter one of the following
commands:
PORALL-All
Trunk Data Blocks will be output in
order of Port Number
(lowest first).
PORNXX-Trunk
Data Block of Port NNX will be
output.
PORVAC-All
unassigned
trunk ports will be listed.
COT-All
CO Trunk Data Blocks will be output.
-
FEX-All
FX Trunk Data Blocks will be output.
TIE-All
TIE Trunk Data Blocks will be output.
DID-All
DID Trunk Data Blocks will be output.
CSA-All
CCSA Trunk Data Blocks will be output.
--
PVL-All
Private Line Trunk Data Blocks will be
output.
NIT-Night
Station
assignments
for all CO/FX/
WATS trunks will be output.
UPN-Universal
Port Number
assignments
for
trunks above T15 will be output.
NOTES:
1. The output format will be the same as that
used for data input in the DTRK Program.
2. OTR willprint for each trunk type, although
it only has a meaning
for PVL.
TGPNN-All
Trunk Data Blocks assigned
to Trunk
Group NN will be output.
9-14
Advertisement
Chapters
Table of Contents
