Page 2
Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies’ product names or trademarks are used herein for identification purposes only and belong to their respective companies.
Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. •...
product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.
We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products.
For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit https://www.acer-group.com/sustainability/en/ our-products-environment. LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots.
Eyes • Rest your eyes frequently. • Give your eyes regular breaks by looking away from the monitor and focusing on a distant point. • Blink frequently to keep your eyes from drying out. Display • Keep your display clean. •...
Page 8
X34 xxxxxx; (“x” = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislationsas below Directive and following harmonized...
Page 9
Acer America Corporation 333 West San Carlos St., San Jose Suite 1500 CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following...
Table of Contents Information for your safety and comfort ............ii Safety instructions .....................ii Special notes on LCD monitors ................ii Cleaning your monitor ..................ii Accessibility ..................... ii Safe listening ....................ii Warnings ......................ii Using electrical power ..................iii Product servicing .................... iii Potentially explosive environments ..............
Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. DP Cable LCD monitor Quick start guide (Optional) X34 S USB cable HDMI cable AC Power cord (Optional) (Optional) X34 User Guide English...
130 mm. Remove Velcro Strap otee: Velcro is used to prevent height adjustment burst and hurting people! Height Adjustment 130mm HDMI 1 otee: Please adjust the height of the monitor after pressing the top of the monitor. X34 User Guide English...
Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Please be sure that the fan can not be touched after installing the wall mounting kit. X34 User Guide English...
Page 15
otee: If installing with a wall mounting kit, it is recommended to use VESA mounting kit (100mm x 100mm) with M4 x 10 (L) mm screws to fix your monitor on the wall. X34 User Guide English...
Connect the USB 3.0 cable to port. Insert the monitor power cable into the power port at the back of the monitor. Plug the power cords of your computer and your monitor into a nearby electrical outlet. X34 User Guide English...
Page 17
Charging USB devices just in DC on mode. • The charging port of USB-A can support fast charging up to 5V/1.5A, the others are 5V/0.9A. • USB dual port in RED is supported for NVIDIA Reflex Latency Analyzer. X34 User Guide English...
The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time from Active OFF state back to ON state is around 3 seconds. X34 User Guide English...
20-pin color display signal cable PI o. Description PI o. Description ML_Lane 0+ ML_Lane 0- ML_Lane 1+ ML_Lane 1- ML_Lane 2+ ML_Lane 2- ML_Lane 3+ ML_Lane 3- CONFIG1 CONFIG2 AUX CH+ AUX CH- Hot Plug Return DP_PWR X34 User Guide English...
160/180Hz otee: Item 1,2,3,4,5,6,7,8 is standard timing table. Item 9,10,11,12,13 is PC graphic card generate timin g. Item 11 is DP timing only Item 12 is HDMI timing only. Item 13 is DP over clock timing. X34 User Guide English...
Hot key2 (defaulte:Ref.white / Peak.white(nits)) Open the Ref.white / Peak.white(nits) control and select your preferred Ref.white / Peak. white(nits) setting. When you are done, press the joystick to quit current page and store. Ref. white (nits) X34 User Guide English...
– Off, 80%, 70%, 60%, or 50%. otee: Higher values allow more blue light through. For the best protection select a lower value. When Blue Light function is set to On, Brightness and Contrast will show each level of Blue Light value. X34 User Guide English...
Page 24
Level 1 (brightness will be automatically adjusted to the minimum range), Level 2 (brightness will be automatically adjusted to the moderate range) or Level 3 (brightness will be automatically adjusted to the maximum range). • Max Brightnesse: Default is off. Color X34 User Guide English...
Page 25
For better color matching representation with the racing game or movie, users can modify some parameters and save them by themselves. Sportse: For better color matching representation with the sports game or movie, users can modify some parameters and save them by themselves. X34 User Guide English...
Page 26
For better color matching representation with the movie. Audio • Volumee: Adjust the volume level from 0 (audio muted) to 100. • Mutee: Select On to mute audio or Off to unmute. G-sync Processor • G-SYC Esportse: To choose G-SYNC Esports on/off. X34 User Guide English...
Page 27
(i.e. gun fire) to happen on the screen, providing you with a full System Latency measurement. • VIDIA ULMBe: It can be enabled on 100Hz by DP port. X34 User Guide English...
Page 28
OSD is locked (“OSD Locked”). During lock-state, you cannot use any User Control keys. To unlock the OSD, press and hold the joystick for about 5 seconds until the “OSD Unlock” message is displayed on the screen. X34 User Guide English...
Page 29
Deep Sleepe: Select DP deep sleep or HDMI deep sleep Off or On. • Quick start modee: Select Off or On. Turn on to speed up boot speed. • Wide Modee: Select your preferred screen aspect from full, aspect. X34 User Guide English...
Page 30
Save Setting to Game mode: There are three user-defined profiles available. When you have decided what settings suit you, save them and system will be able to recall the settings in the future when you turn on gaming mode . X34 User Guide English...
Check if the computer system is switched on and in power saving/standby mode. otee: Acer monitor is purposed for video and visual dispaly of information obtained from electronic devices. Regulatory Compliance 1111228778 X34 User Guide English...