Table of Contents
Advertisement
MANAGING KEY ASSIGNMENTS
You can view station key assignments and add extenders to some of the pro-
grammable keys for easy one touch operation of frequently used features.
An extender is a number that makes an otherwise general key very specific.
Adding the digit "4" to a PAGE key defines this key for paging zone four. Adding
"225" to a directed pickup key will define this key as pickup for extension 225
only. The key must already be assigned by the installing technician.
Use this program to assign extenders to the following keys:
KEY
DESCRIPTION
BOSS .............. Boss/Secretary ................ 1–4
DP ................... Direct Pickup .................... Extension or station group number
DS ................... Direct Station ................... Any extension number
FWRD .............. Call Forwarding ................. 0–6
GPIK ................ Group Pick-Up .................. 01–20
IG .................... In/Out of Group ................ Any group number you are part of
MMPG ............. Meet Me Page .................. 0–9, ✱
PSMG .............. Programmed Message ..... 01–20
PAGE ............... Page ................................. 0–9, ✱
SPD ................. Speed Dialing ................... 00–49, 500–999
DIR .................. Directory .......................... PERS (1), SYS (2) or STN (3)
VT .................... Voice Mail Transfer ........... Voice Mail Group (501–529)
PROGRAM KEYS
UP & DOWN - Select the extension number.
KEYPAD - Used to enter extender codes.
HOLD - Used to clear the displayed data.
Open customer programming and follow the instructions below.
ACTION
1. Press TRSF and then dial 107
Display shows the first station
2. Dial the station number (e.g., 205) OR use
UP or DOWN to scroll through the station
numbers and press the right soft key to
move the cursor
26
EXTENDER
500–529
DISPLAY
[201] KEY EXTEND
01:CALL1
[205] KEY EXTEND
01:CALL1
3. Enter the key number (e.g., 18) OR use
UP and DOWN to scroll through the keys
and use the right soft key to move the
cursor OR press the key to be programmed
4. Dial the extender according to the list
above and the system will display your
selection
If there are no more entries, press
the left soft key to return to step 2
5. Press TRSF to store and exit programming
OR press SPK to store and advance to the
next program
[205] KEY EXTEND
18:DS
[205] KEY EXTEND
18:DS207
27
Advertisement
Table of Contents
