Compatibility - GE PACSystems RX3i User Manual

Cep profinet scanner

Hide thumbs Also See for PACSystems RX3i:

Table of Contents

1.7 Compatibility

The PROFINET Scanner modules require the CPU firmware and programming software versions listed in the

following table

Proficy Machine Edition

RX3i CPU Version

RX3i PNC Version

RXi Controller Version

RX3i I/O Modules

HART Pass Through

GFK-2883E

Proficy Machine Edition version 8.6 SIM 3 or later

PACSystems RX3i CPU, IC695CPU315/CPU320/CPE305/CPE310/CPE330/

CRU320, with firmware version 8.50 or later

PACSystems RX3i PROFINET IO-Controller, IC695PNC001, with firmware

version 2.20 or later

Effective with IC695CEP001 Firmware version 2.30, the PACSystems RXi

Distributed I/O Controller, ICRXICTL000, is no longer compatible with

IC695CEP001. ICRXICTL000 with firmware version 7.80 or later may be used

with CEP001 version 2.01 or earlier.

For a complete list of modules supported by the current firmware release,

refer to the section,

Supported I/O

HART Pass Through entails usage of PC-based applications, RX3i Analog

modules with HART functionality and (optionally) supporting PROFINET

products. HART Pass Through operation is described in the PACSystems HART

Pass Through User Manual, GFK-2929.

March 2018

Modules, above.

Chapter 1. Overview

Table of Contents