Initial Operation; Switching On; Switching Off; Sleep Mode - Bosch GRL500 H Professional Original Instructions Manual
Hide thumbs
Also See for GRL500 H Professional:
- Operating/safety instructions manual (36 pages) ,
- Manual (27 pages)
Table of Contents
Advertisement
Available languages
Available languages
OBJ_BUCH-1960-005.book Page 38 Wednesday, March 28, 2018 11:41 AM
38 | English
Initial Operation
Note: In their delivery condition, the measuring tool and laser
receiver are paired (= laser receiver can perform the remote
control functions).
To save energy, only switch the measuring tool and the laser
receiver on when you are using them.
Switching On
– To switch on the measuring tool, slide the laser
receiver into the charging/storage station 6 and
then press the On/Off button 17.
or
– Slide the laser receiver into the charging/storage
station 6 and remove it from the charging/stor-
age station again. To switch on the measuring
tool, you then have to press the On/Off button
17 within 30 minutes.
Outcome
– All display indicators light up briefly.
– Automatic levelling starts (see "Automatic Levelling",
page40).
– The anti-drift system is activated 30 s after automatic lev-
elling (see "Anti-Drift System (ADS)", page40).
The measuring tool then emits the laser beam 7 (GRL500 H)
or the laser beam 7 and the plumb beam 1 (GR L500 HV).
Switching Off
– Press the On/Off button 17 for approx. 2 s.
Outcome
– The rotation stops and the laser beam is switched off.
– All display indicators and the display illumination are
switched off.
Note: If the laser receiver and the rotational laser level are
switched off, the laser receiver first has to be docked back in
the charging/storage station 6 to switch the tool on.
Sleep Mode
The laser receiver can be used to put the measuring tool into
sleep mode for maximum 2 hours.
– To switch on sleep mode, press the sleep mode
button 21.
In sleep mode, the sleep mode indicator 44 on the
laser receiver lights up and the theft alarm indicator
36 also lights up if the theft alarm system is activat-
ed.
The theft alarm LED 4 on the measuring tool flashes
if the theft alarm system is activated.
All other indicators and the laser beam are
switched off. The anti-drift system remains activat-
ed.
– To end sleep mode, press the sleep mode button
21 again.
1 609 92A 4DX | (28.3.18)
Sleep mode is automatically switched on if the laser beam
does not run through the reception area 26 for more than
30 minutes or the buttons on the laser receiver are not
pressed for more than 30 minutes.
Note: If the laser receiver and the rotational laser level are in
sleep mode for more than 2 h, both are automatically
switched off. The laser receiver first has to be docked back in
the charging/storage station 6 to switch the tool on.
The standard setting on delivery is
[Sleep mode function deactivated] .
– To activate the sleep mode function, si-
multaneously press the On/Off button
17 and the sleep mode button 21 for
approx. 2 s while the measuring tool is
switched on.
The new state [Sleep mode function acti-
vated = SLP On] and the sleep mode indi-
cator 44 will be shown on the display for
approx. 3 s.
This setting is not saved when the tool is
switched off. The measuring tool always
starts up with the sleep mode function de-
activated.
– To deactivate the sleep mode function,
simultaneously press the On/Off button
17 and the sleep mode button 21 for
approx. 2 s while the measuring tool is
switched on.
The new state [ Sleep mode function deac-
tivated = SLP OFF] and the sleep mode in-
dicator 44 will be shown on the display for
approx. 3 s.
Automatic Shutdown
The measuring tool and the laser receiver switch off automat-
ically under certain conditions (see "Switching Off", page38
for outcome):
– The measuring tool is outside of the self-levelling range for
more than 2.5 h and the error code resulting from this is
not rectified (see "Correction of Malfunctions", page47).
– The measuring tool is not switched on again within 2 h
when sleep mode is activated.
– The anti-drift system is triggered for more than 2.5 h.
– The measuring tool is outside of the operating temperature
range.
Before the measuring tool and laser receiver auto-
matically switch off, an audio signal sounds and the
out-of-temperature-range indicator 34 flashes for
approx. 5 s.
Bosch Power Tools
Advertisement
Chapters
Table of Contents
