HP Vectra VL6 7 Installation Manual page 7

Fast etherlink xl tx pci network interface card (10/100bt)

Hide thumbs Also See for Vectra VL6 7:

c905.bk : ch_2.fb4 Page 2 Thursday, October 22, 1998 9:51 AM

Connecting to a Netware 3.12 server

Windows 95 SR2

adapter card into a PCI slot.

2 Power on the machine and restart Windows 95 SR2 in MS-DOS Mode.

3 Insert the 3COM drivers diskette (ver. 2.1 downloaded from 3COM's Web

site) and execute 3C90XCFG.EXE.

4 Select "CONFIGURE NIC" and verify the resource settings listed above

under the heading "Device Configuration."

5 If changes are required, save those changes and exit.

6 Remove the 3Com cards driver diskette and restart the machine.

7 Windows 95 SR2 should automatically recognize the 3COM 3C905

Ethernet card.

8 With "PCI Ethernet Controller" listed, click on "Next."

9 Click on "Other Locations" and insert the 3C905 driver's disk 1 of 2.

10 Set the path to "A:\" and click on "OK." (If you have a Hewlett-Packard

preloaded HDD, set the path statement to

"C:\MASTERS\LANDRV\3C905\Disk1\")

11 "3Com Etherlink XL TPO 10Mb Ethernet Adapter" should now be listed.

Click on "Finish."

12 When prompted, insert the 3C905 driver's disk 2 of 2 and click on "OK."

If you are using a Vectra VL7, follow the instructions below and then

continue from step 15.

If you are using a VL8, go straight to step 13.

• In the "Copying Files..." window, the path should read "A:\Win95\" (If

you have an HP pre-loaded HDD, set the path statement to "C:\MAS-

TERS\LANDRV\3C905\Disk2\Win95\")

• Click on "OK" to continue the installation.

13 Insert the 3C905 driver's disk 1 of 2.

14 Set the path to "A:\" and click on "OK." (If you have a Hewlett-Packard

preloaded HDD, set the path statement to

"C:\MASTERS\LANDRV\3C905\Disk2\")

15 Click on "OK" to provide Computer and Workgroup names.

16 At the "Network" dialogue box, click on the "Identification" folder.

17 Enter your "Computer Name," "Workgroup," and "Computer Description"

3c905-tx