HP Vectra VL6 7 Installation Manual page 6

Fast etherlink xl tx pci network interface card (10/100bt)

Hide thumbs Also See for Vectra VL6 7:

c905.bk : ch_2.fb4 Page 1 Thursday, October 22, 1998 9:51 AM

Windows 95 SR2

Connecting to a Netware 3.12 server

Requirements

• HP Vectra with Windows 95 SR2 installed.

• 3COM Etherlink 3C905 Ethernet card and drivers disk ver 2.1.

• File Name: OEMSETUP.INF Size: 41KB Date: 3/14/97

• Windows 95 SR2 media. (If you have an HP preloaded HDD, the media is

located at C:\Masters\Win95\System\Cabs\)

• Novell Netware 3.12 server that supports Net BEUI, NWLink IPX/SPX,

and

• NWLink NetBIOS transfer protocols.

Device Configuration

• Network Driver Optimization Normal

• Full Duplex

Disabled

• Boot PROM

Disabled

• Media Type

10BASE-T

Vectra VL8

I/O Base Address

FC40h (PCI)

Interrupt Request

11 (PCI)

Procedure

1 With the HP Vectra turned off, install the 3COM Etherlink III 3C905

Connecting to a Netware 3.12 server

Vectra VL7

FCC0h (PCI)

9 (PCI)

Windows 95 SR2

3c905-tx