Table of Contents
Advertisement
3.5.3 Operation Parameter screen (Operation param screen)
The operation parameters are set. Parameters with a " " mark added are validated after restarting.
Number
37 0001 Sensor
37 0002 Sensor
37 0003 Center
37 0004 Center
37 0005 Skip return
37 0006 Skip feed
37 0007 Skip past
37 0008 Skip past
37 0009 tlml X
37 0010 tlml Y
37 0011 tlml Z
37 0012 Surface
37 0013 TLM L
37 0014 TLM D
Downloaded from
ManualsNet.com
CHAPTER 1 SCREEN OPERATIONS
Name
This sets the length to the touch sensor tip.
length (TL)
This sets the ball diameter to the touch sensor tip.
diameter (TD)
This designates the X axis direction for the spindle
compen (H)
center deviation amount from the touch sensor
center.
This designates the Y axis direction for the spindle
compen (V)
center deviation amount from the touch sensor
center.
This sets the one-time return distance for contacting
amount
again.
This sets the feedrate when contacting again.
rate
This sets the difference (horizontal axis direction) of
amout (H)
the skip read value and actual skip position.
This sets the difference (vertical axis direction) of the
amout (V)
skip read value and actual skip position.
This sets the TLM reference length.
Set the distance from the tool change point (reference
point) 0 point to the measurement reference point
(plane) for tool length measurement.
When using tool length measurement I, this sets the
height
deviation amount of the reference measurement
plane and actual measurement plane.
When using tool length measurement II, this sets the
distance from the table to the reference measurement
plane.
This sets the tool length measurement axis.
meas axis
This sets the tool diameter measurement axis.
meas axis
search engine
3. Setup Screens
Details
I – 161
Setting range (units)
–999999.999 to
999999.999 (mm)
–999999.999 to
999999.999 (mm)
–999999.999 to
999999.999 (mm)
–999999.999 to
999999.999 (mm)
–999999.999 to
999999.999 (mm)
1 to 80000 (mm/min)
–999999.999 to
999999.999 (mm)
–999999.999 to
999999.999 (mm)
–99999.999 to
99999.999 (mm)
–99999.999 to
99999.999 (mm)
Axis name
Axis name
Advertisement
Table of Contents
