RBC-MTSC2 Mini Touch Screen Controller
6.4.1.
Configuration
To access Configuration menu follow the sequence below on the screen using two fingers.
Press and hold the bottom right hand corner of the screen keeping your finger in place (do not
remove) and then press and hold the bottom left hand corner of the screen.
Now keeping your finger on the left hand corner of the screen (do not remove) release your right
hand finger and tap the bottom right hand corner of the screen four times with your finger.
Executing this sequence correctly will reveal the configuration menu above.
6.4.2.
Configuration Menu Icons
General R/C setup
1.
DN code editing
3.
Clock and Scheduler
5.
Diagnostics
7.
Reboot button
9.
User interface setup
2.
Appearance
4.
Not assigned or used
6.
Model information
8.
Back button
10.
11
Installation & Owner Manual