Removal Of Drum Block And Light Ass'y L/R - Sony VID-P110 Service Manual
Video presentation stand
Hide thumbs
Also See for VID-P110:
- Features & specifications (2 pages) ,
- Operating instructions manual (56 pages)
Table of Contents
Advertisement
2-2-2. Removal of Drum Block and Light
Ass'y L/R
Drum Block
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the table ass'y. (Refer to section 2-1-2.)
3. Disconnect one connector (CN1) on VSW-60 board,
one connector (CN7) on SY-248 board and one
connector (CN2) on PS-517 board.
4. Remove three screws "a" (PS3x6) and release the
camera arm stopper.
5. Remove four screws "b" (K4x12) not to rebound the
low load spring while pressing with your hand.
6. Remove six screws "c" (PWH4x10) and then remove
drum ass'y.
Light (L) ass'y
PS-517 board
2-4 (E)
Left pipe
support bracket
Ground terminal
screw "d"
(PS3x6)
screw "f"
(PS3x6)
CN7
SY-248 board
CN2
screw "e"
(P4x8)
Light Ass'y L/R
1. Remove the cover ass'y. (Refer to section 2-1-1.)
2. Remove the table ass'y. (Refer to section 2-1-2.)
3. Disconnect two connectors (CN6, CN7) on PS-517
board.
4. Remove one screw "d" (B3x6) and ground terminal.
5. Remove two each screws "e" (P4x8) fastening pipe
support bracket L/R, one each screw "f" (B3x10) and
then remove light ass'y L/R.
Drum block
Low load spring
Light (R) ass'y
CN1
CN7
CN6
screw "e"
(P4x8)
screw "c"
(PWH4x10)
screw "b"
(K4x12)
screw "c"
(PWH4x10)
screw "a"
(PS3x6)
screw "a" (PS3x6)
Right pipe
support bracket
Ground terminal
washer
screw "d"
(PS3x6)
VSW-60 board
screw "f"
(B3x10)
VID-P110
- Quick Links:
- Operating Instructions
Hide quick links:
Advertisement
Table of Contents
