4-5-5.
Slot Fan
Preparation
1.
Refer to
"4-2. Flow
Chart".
Procedure
1.
Disconnect the fan harness from the connector (CN915) on the MB-1206 board.
2.
Open the two wire clamps and remove the fan harness.
CN915
(MB-1206 board)
Wire clamps
3.
Remove the four screws to detach the slot fan assembly.
PSW3 x 6
Note
• When installing the slot fan assembly, fit the two bosses with the two holes.
• Avoid impact on the slot fan assembly.
PWS-4400
Fan harness
PSW3 x 6
Slot fan assembly
Holes
Bosses
4-17