Siemens SITOP UPS1600 Equipment Manual page 98
Hide thumbs
Also See for SITOP UPS1600:
- Manual (232 pages) ,
- Getting started (40 pages) ,
- Getting started (38 pages)
Table of Contents
Advertisement
Engineering and remote access
3.5 SIMATIC STEP 7
• Basic256 - Sign & Encrypt
Allow Basic256 security profile for OPC UA communication.
• Basic256Sha256 - Sign & Encrypt
Allow security profile Basic256Sha256 for OPC UA communication.
NTP settings
Parameter
NTP client activated
NTP server address 1
NTP server address 2 - 4
• NTP client activated
If the NTP client is activated, then the local time is synchronized with the specified time of
the specified NTP server.
• NTP -server address 1
IP address of the 1st NTP server. When the NTP client is activated, at least one address of
an NTP server must be configured.
• NTP server address 2 - 4
IP address of up to 3 optional NTP servers
PROFINET security
Parameter
DCP write protection activated
• DCP write protection activated
Activate or deactivate write protection for configuration changes via the DCP protocol
98
Value range
Yes / No
IPv4
IPv4
Value range
Yes / No
Equipment Manual, 07.2021, A5E37775406-11-76
Default setting
No
0.0.0.0 (none)
0.0.0.0 (none)
Default setting
No
SITOP UPS1600 / BAT1600 / UPS1100
- Quick Links:
- Sitop Bat1600 and Ups1100
- Ups1600
- Ups1100
- Sitop Ups1100
Hide quick links:
Advertisement
Table of Contents
