Class-Of-Service Changeover For Station Groups; Interrogating A Class Of Service - Siemens HiPath 4000 Operating Instructions Manual
Attendant console ac4
Hide thumbs
Also See for HiPath 4000:
- Operation manual (164 pages) ,
- Operating manual (134 pages) ,
- Operating instructions manual (133 pages)
Table of Contents
Advertisement
Step by Step
PROG
COS
Class-of-service changeover for station
groups
The class of service of certain groups of stations can be temporarily
changed to another class of service (a predefined alternative class of
service). This changeover can be used to prevent toll calls being made
after hours, for example.
Interrogating a class of service
Prerequisite: the terminal is idle or in call state.
Press Program menu.
Press Class-of-service changeover.
The list of the first 8 station groups with class of service changeover
is displayed on page 1 in memory layout.
STATION GROUP RESTRICTION
Group
1
ON or OFF
2
ON or OFF
to
Group
8
ON or OFF
The message ALL ON or OFF appears in line 11 if all groups are in the
same state.
If groups are being interrogated by another console, the menu cannot
be accessed.
If there are more than 8 groups:
scroll forwards with *, scroll backwards with #.
Class-of-service changeover for station groups
1+
53
Advertisement
Table of Contents
