Serial Call - Siemens HiPath 4000 Operating Instructions Manual

Attendant console ac4

Hide thumbs Also See for HiPath 4000:

Table of Contents

Serial call

Step by Step

Serial call

If a caller (LINE 1/LINE 2) wishes to be connected to several parties in

turn, the call is handled as a serial call.

Prerequisite: a call answered.

Press Serial call.

SERIAL

The LED above the key lights up.

The serial call function is active.

Then perform speed servicing or normal extending Æ page 19. LED

goes out after caller is connected.

The extended call is returned to the attendant terminal as soon as the

internal party hangs up. This automatically cancels the serial mode.

The serial call key must be pressed each time before the call is re-ex-

tended if another recall is wanted.

A serial call is displayed in line 1 with the message SERIAL CALL

EXCH or line 2 with SERIAL CALL TIE. If the "serial call" feature is not

installed in the PABX, the message NOT POSSIBLE appears in line 12

after the serial call key is pressed.

Table of Contents