Table 6: Types Of Mac Entries - GE JungleMUX SONET Technical Practice

Table of Contents

Clear All Dynamic Entries on this QVLAN

(Displayed for Q-Access and Q-Trunk ports when „Filter by QVLAN ID‟

checkbox is checked.)

To clear all locally sourced dynamic entries in the "LAN" MAC address

table that are associated with the selected QVLAN, click the Clear All

Dynamic Entries on this QVLAN and then Configure button.

Note: The remote MAC addresses stored locally (learned from the GMII

port) are not affected by this action.

Clear All Dynamic Entries on this D-PVLAN

To clear all locally sourced dynamic entries in the "LAN" MAC address

table that are associated with the selected D-PVLAN, click the Clear All

Dynamic Entries on this D-PVLAN and then Configure button.

Note: The remote MAC addresses stored locally (learned from the GMII

port) are not affected by this action.

The following table summarizes the types of "LAN" and "WAN" MAC address

table entries and various ways to remove them from these tables.

Source

Entry Type

Dynamic

Origin

Learned

Applicable port mode

No Blocking

Removed by...

Aging Out

Clear All Dynamic

Entries

Clear All Dynamic

Entries on this

D-PVLAN / QVLAN

Clear Selected

Dynamic Entries

Delete button in

Static MAC Setup

Apply/Reduce MAC

Learning Limit

Change "Secured" to

"No Blocking"

Disable Port

(manually or auto)

Unit Reboot

"LAN" Table Entries

Local

Pseudo-Static

Learned

Secured

Yes