Table of Contents
Advertisement
1. Functions in each area
1-3. Wipe area
8 Wipe pattern selector buttons
These 1 buttons are used to select the corresponding wipe patterns
while the indicator of the [BKGD PATT] button (9) or KEY PATT button
(9) is lighted.
They are used to select the corresponding setting menus when the
indicator of the FUNC button (;) is lighted.
The indicator of the selected button lights in amber.
9 BKGD, KEY pattern selector buttons
These buttons are used to switch the wipe pattern selection.
The wipe pattern of a background transition is selected when the
indicator of the [BKGD PATT] button is lighted after it was pressed.
The wipe pattern of a key transition is selected when the indicator of the [KEY PATT] button is lighted after it
was pressed.
Each time the [BKGD PATT] button or [KEY PATT] button is pressed, the pattern page is changed in the
sequence of WIPE, SQ (squeeze), SL (slide) and 3D (3 dimensions), and the pattern page indicator LED (:) is
also switched.
3D cannot be selected using the [KEY PATT] button.
: Pattern page indicator LEDs
These LEDs indicate the pages selected by the background transitions while the indicator of the [BKGD PATT]
button is lighted. They indicate the pages selected by the key transitions while the indicator of the [KEY PATT]
button is lighted.
The WIPE, SQ (squeeze), SL (slide) or 3D (3 dimensions) LED lights.
; FUNC button
When this button is pressed, its indicator lights in amber. When a wipe pattern selector button (8) is pressed
while the indicator of the FUNC button is lighted, the setting menu indicated below the button is displayed on
the LCD screen.
[TIME]:
The auto transition time settings are performed.
[WIPE]:
The modify, border or soft effect decoration settings are performed for wipe.
[COLOR]:
The color background settings are performed.
[KEY]:
The key settings are performed.
[CHR KEY]: The chroma key settings are performed.
[FREEZE]: The freeze status is displayed and freeze settings are performed.
[DSK]:
DSK settings are performed.
[PinP]:
PinP settings are performed.
[IN/OUT]:
The input/output signals are set.
[MEMORY]: The preset memory, frame memory or SD card memory settings are performed.
[XPT]:
The crosspoint assignment is displayed and set.
[SYSTEM]: The system settings are performed.
See 3-1-5. (Operating Instructions in CD-ROM)
See 3-. (Operating Instructions in CD-ROM)
See 3-7. (Operating Instructions in CD-ROM)
See 3-3. (Operating Instructions in CD-ROM)
See 3-3-6. (Operating Instructions in CD-ROM)
See 3-8. (Operating Instructions in CD-ROM)
See 3-5. (Operating Instructions in CD-ROM)
See 3-4. (Operating Instructions in CD-ROM)
See 4. (Operating Instructions in CD-ROM)
See 3-10, 3-11 and 3-1. (Operating Instructions in CD-ROM)
See 5-. (Operating Instructions in CD-ROM)
See 5. (Operating Instructions in CD-ROM)
9
PAGE
1
2
3
WIPE
SQ
SL
3D
TIME
WIPE
COLOR
4
5
6
ON
KEY
CHR KEY
FREEZE
BKGD PATT
7
8
9
DSK
PinP
IN/OUT
KEY PATT
10
12
11
MEMORY
XPT
SYSTEM
FUNC
WIPE PATTERN / FUNCTION
Advertisement
Chapters
Table of Contents
